CHEMISTRY GLOSSARY

microscope    →   mikroskop

Microscope is an instrument that produces enlarged images of small objects. The optical microscopes (light microscope) use visible light and a system of lenses to magnify images. Typical magnification of a light microscope is up to 1500× ("1500 times")with a theoretical resolution limit of around 200 nm. Instead of using light, electron microscopes transmit a beam of electrons through, or onto the surface of, a specimen. An electron beam has a much shorter wavelength than does light, and can reveal structures as small as 2 nm.

mole    →   mol

Mole (mol) is the SI base unit of amount of substance.

The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kg of carbon 12.

When the mole is used, the elementary entities must be specified and may be atoms, molecules, ions, electrons, other particles, or specified groups of such particles. In this definition, it is understood that the carbon 12 atoms are unbound, at rest and in their ground state.

mustard agent    →   plikavac

Mustard agents are usually classified as blistering agents owing to the similarity of the wounds caused by these substances resembling burns and blisters. However, since mustard agents also cause severe damage to the eyes, respiratory system and internal organs, they should preferably be described as blistering and tissue-injuring agents. Normal mustard agent (yperite), 1,1-thio-bis-[2-chloroethane], reacts with a large number of biological molecules. The effect of mustard agent is delayed and the first symptoms do not occur between 2-24 hours after exposure. At room temperature, mustard agent is a liquid with low volatility and is very stable during storage.

SI units    →   SI jedinice

See International System of Units

solid solution    →   čvrste otopine

Solid solution is a crystalline material that is a mixture of two or more components, with ions, atoms, or molecules of one component replacing some of the ions, atoms of the other component in its normal crystal lattice.

strength    →   čvrstoća

Strength is a mechanical characteristic of a solid body, that gives the resistance to cutting. The solid body comprises from one to more crystals.

monosaccharide    →   monosaharid

Monosaccharides are carbohydrates, with the general formula C_n(H₂O)_n, that cannot be decomposed to a simpler carbohydrates by hydrolysis.

Depending on whether the molecule contains an aldehyde group (-CHO) or a ketone group (-CO-) monosaccharide can be a polyhydroxy aldehyde (aldose) or a polyhydroxy ketone (ketose). These aldehyde and ketone groups confer reduction properties on monosaccharides. They are also classified according to the number of carbon atoms they contain: trioses have three carbon atoms, tetroses four, pentoses five, hexoses six, heptoses seven, etc. These two systems of classification are often combined. For example, a six-carbon polyhydroxy aldehyde such as D-glucose is an aldohexose, whereas a six-carbon polyhydroxy ketone such as D-fructose is a ketohexose.

The notations D and L are used to describe the configurations of carbohydrates. In Fischer projections of monosaccharides, the carbonyl group is always placed on top (in the case of aldoses) or as close to the top as possible (in the case of ketoses). If the OH group attached to the bottom-most asymmetric carbon (the carbon that is second from the bottom) is on the right, then the compound is a D-sugar. If the OH group is on the left, then the compound is an L-sugar. Almost all sugars found in nature are D-sugars.

Monosaccharides can exist as either straight-chain or ring-shaped molecules. During the conversion from straight-chain form to cyclic form, the carbon atom containing the carbonyl oxygen, called the anomeric carbon, becomes a chiral center with two possible configurations (anomers), α and β. When the stereochemistry of the first carbon matches the stereochemistry of the last stereogenic center the sugar is the α-anomer when they are opposite the sugar is the β-anomer.

Nernst’s electrode potential equation    →   Nernstova jednadžba za elektrodni potencijal

For general reaction of some redox system

dependence of electrode potential of redox system upon activity of oxidised and reduced form in solution is described in Nernst’s equation for electrode potential:

where E = to electrode potential of redox system

E° = standard electrode potential of redox system

R = universal gas constant

T = thermodymical temperature

F = Faraday’s constant

z = number of electrons exchanged in redox reaction

a_O = activity of oxidised form

a_R = activity of reduced form

n = stechiometrical coefficient of oxidised form

m = stechiometrical coefficient of reduced form

nerve poison    →   živčani bojni otrov

Nerve poison (nerve gas, agents) have had an entirely dominant role since the Second World War. Nerve poisons acquired their name because they affect the transmission of nerve impulses in the nervous system. All nerve poisons belong chemically to the group of organo-phosphorus compounds. They are stable and easily dispersed, highly toxic and have rapid effects both when absorbed through the skin and via respiration. Nerve poisons can be manufactured by means of fairly simple chemical techniques. The raw materials are inexpensive and generally readily available.

The most important nerve agents included in modern chemical weapons arsenals are:

Nerve poisons are colorless, odorless, tasteless liquids of low volatility. Antidotes are atropine sulfate and pralidoxime iodide.

nuclear reactor    →   nuklearni reaktor

Nuclear reactor is an assembly of fissionable material (uranium-235 or plutonium-239) designed to produce a sustained and controllable chain reaction for the generation of electric power.

The essential components of a nuclear reactor are:

1. The core, metal rods containing enough fissionable material to maintain a chain reaction at the necessary power level (as much as 50 t of uranium may be required).
2. A source of neutrons to initiate the reaction (such as a mixture of polonium and beryllium)
3. A moderator to reduce the energy of fast neutrons for more efficient fission (material such as graphite, beryllium, heavy water, and light water are used)
4. A coolant to remove the fission-generated heat (water, sodium, helium, and nitrogen may be used)
5. A control system such as rods of boron or cadmium that have high capture cross sections (to absorb neutrons)
6. Adequate shielding, remote-control equipment, and appropriate instrumentation are essential for personnel safety and efficient operation.