CHEMISTRY GLOSSARY

absolute temperature    →   apsolutna temperatura

Absolute temperature denoting a temperature measured on the absolute scale, a scale of temperature based on absolute zero as the lowest temperature.

autoignition temperature    →   temperatura samozapaljenja

Autoignition temperature is the minimum temperature required to initiate or cause self-sustained combustion in any substance in the absence of a spark or flame. This varies with the test method.

Celsius temperature scale    →   Celsiusova temperaturna skala

For value of zero in Celsius temperature scale the freezing point of water at a pressure of 101 325 Pa is taken. The boiling point of water at a pressure of 101 325 Pa is taken as another reference point. This range is divided into 100 equal parts, and each part is an equivalent to 1 °C. Units of Celsius temperature scale (°C) and thermodynamic temperature scale (K) are identical

1 °C = 1 K.

critical temperature    →   kritična temperatura

Critical temperature is the temperature of the liquid-vapour critical point, that is, the temperature above which a gas cannot be liquefied by an increase of pressure.

glass transition temperature    →   temperatura staklastog prijelaza

Glass transition temperature (T_g) is the temperature at which an amorphous polymer is transformed, in a reversible way, from a viscous or rubbery condition to a hard and relatively brittle one.

Curie temperature    →   Curiejeva temperatura

For a ferromagnetic material, Curie temperature or Curie point (T_C) is the critical temperature above which the material becomes paramagnetic. For iron the Curie point is 760 °C and for nickel 356 °C. It was named after the French physicist Pierre Curie (1859-1906).

Neel temperature    →   Neelova temperatura

Néel temperature (T_N) is the critical temperature above which an antiferromagnetic substance becomes paramagnetic. The phenomenon was discovered around 1930 by the French physicist L.E.F. Néel (1904-2000).

temperature    →   temperatura

Temperature is a measure to the average kinetic energy of its molecules. The SI unit in which thermodynamic temperature is expressed is the kelvin (K).

temperature rating    →   temperaturno područje

Temperature rating is the maximum and minimum temperature at which the material may be used in continuous operation without loss of its basic properties. For example, temperature ratings are often quoted for electrical insulators, specifying the maximum temperature at which they provide adequate protection against electrical breakdown.

tempering    →   kaljenje

Tempering is a rapid cooling of metals (often steels) from a suitable elevated temperature, thus changing its properties, e.g. steel becomes harder. This is generally accomplished by immersion in water, oil, polymer solution, or salt, although forced air is sometimes used.