CHEMISTRY GLOSSARY

saturated solution    →   zasićena otopina

Saturated solution is a solution that holds the maximum possible amount of dissolved material. When saturated, the rate of dissolving solid and that of recrystallisation solid are the same, and a condition of equilibrium is reached. The amount of material in solution varies with temperature; cold solutions can hold less dissolved solid material than hot solutions. Gases are more soluble in cold liquids than in hot liquids.

solid state    →   čvrsto agregatno stanje

Solid state is characterised by a constant shape and volume. Particles are placed very close to one another and have efect one on another with great attraction forces. Solid bodies do not assume the shape of the container in which they are put.

solubility    →   topljivost

Solubility is the maximum amount of solute that dissolves in a given quantity of solvent at a specific temperature. Generally, for a solid in a liquid, solubility increases with temperature; for a gas, solubility decreases. Common measures of solubility include the mass of solute per unit mass of solution (mass fraction), mole fraction of solute, molality, molarity, and others.

solar cell    →   sunčeva ćelija

Solar cell, or photovoltaic cell, is a device that captures sunlight and transforms it directly to electricity. All solar cells make use of photovoltaic effect, so often they are called photovoltaic cells. Almost all solar cells are built from solid-state semiconducting materials, and in the vast majority of these the semiconductor is silicon.

The photovoltaic effect involves the generation of mobile charge carriers-electrons and positively charged holes-by the absorption of a photon of light. This pair of charge carriers is produced when an electron in the highest filled electronic band of a semiconductor (the valence band) absorbs a photon of sufficient energy to promote it into the empty energy band (the conduction band). The excitation process can be induced only by a photon with an energy corresponding to the width of the energy gap that separates the valence and the conduction band. The creation of an electron-hole pair can be converted into the generation of an electrical current in a semiconductor junction device, wherein a layer of semiconducting material lies back to back with a layer of either a different semiconductor or a metal. In most photovoltaic cells, the junction is p-n junction, in which p-doped and n-doped semiconductors are married together. At the interface of the two, the predominance of positively charged carriers (holes) in the p-doped material and of negatively charged carriers (electrons) in the n-doped material sets up an electric field, which falls off to either side of the junction across a space-charge region. When absorption of a photon in this region generates an electron-hole pair, these charge carriers are driven in opposite directions by the electric field, i.e. away from the interface and toward the top and bottom of the two-layer structure, where metal electrodes on these faces collect the current. The electrode on the top layer (through which light is absorbed) is divided into strips so as not to obscure the semiconducting layers below. In most widely used commercial solar cells, the p-doped and n-doped semiconductive layers are formed within a monolithic piece of crystalline silicon. Silicon is able to absorb sunlight at those wavelengths at which it is most intense-from the near-infrared region (wavelengths of around 1200 nm) to the violet (around 350 nm).

solubility product constant    →   konstanta produkta topljivosti

Solubility product constant (K_sp) (or the solubility product) is the product of the molar concentrations of the constituent ions, each raised to the power of its stoichiometric coefficient in the equilibrium equation. For instance, if a compound A_aB_b is in equilibrium with its solution

the solubility product is given by

solution composition    →   sastav otopine

Solutions are homogenous mixtures of several components. The component which is found in a greater quantity is called the solvent and the other components are called solutes. Quantitative composition of a solution can be expressed by concentration (amount, mass, volume and number), by fraction (amount, mass, and volume), ratio (amount, mass, and volume) and by molality. Amount, mass, and volume ratio are numerical, nondimensional units and are frequently expressed as percentage (% = 1/100), promile (‰ = 1/1000) or parts per million (ppm = 1/1 000 000). If it is not defined, it is always related to the mass ratio.

Solvay’s process    →   Solvayev postupak

Solvay ’s process is an industrial process for producing sodium carbonate from sodium chloride and ammonia and carbon dioxide.

Carbon dioixide is produced by the thermal decomposition of limestone, CaCO₃(s).

Quicklime, formed as a by-product of the thermal decomposition of limestone, is treated with water to form calcium hydroxide.

Calcium hydroxide is heated with ammonium chloride to form ammonia and calcium chloride (by product).

Carbon dioxide reacts with ammonia to form ammonium carbonate.

Ammonium carbonate further reacts with carbon dioxide to form ammonium bicarbonate.

Ammonium bicarbonate then react with sodium chloride to form sodium bicarbonate.

Dry sodium bicarbonate is heated in rotary furnace to give anhydrous sodium carbonate or soda ash.

The carbon dioxide produced is recycled back into the process.

absorbance    →   apsorbancija

Absorbance (A) is a logarithm of the ratio of incident radiant power (P_o) to transmitted radiant power (P) through a sample (excluding the effects on cell walls).

The absorption of light by a substance in a solution can be described mathematically by the Beer-Lambert law

where A is the absorbance at a given wavelength of light, ε is the molar absorbtivity or extinction coefficient (L mol^-1 cm^-1), unique to each molecule and varying with wavelength, b is the length of light path through the sample (cm), and c is the concentration of the compound in solution (mol L^-1).

acetal    →   acetal

Acetals are organic compounds having the structure R₂C(OR’)₂ (R’ ≠ H). They are organic compounds formed by addition of alcohol molecules to aldehyde or ketone molecules. Originally, the term was confined to derivatives of aldehydes (one R = H), but it now applies equally to derivatives of ketones (neither R = H ). Mixed acetals have different R’ groups. The formation of acetals is reversible; acetals can be hydrolysed back to aldehydes (ketone) in acidic solutions.

Acetal, 1,1-diethoxyethane (CH₃CH(OC₂H₅)₂), is an organic compound, pleasant smelling, formed by addition of ethyl alcohol to ethanal (acetaldehyde). It is used as a solvent and in synthetic organic chemistry.

acetone    →   aceton

Acetone (propanon) is a colourless flammable volatile compound, CH₃COCH₃. It is used as a solvent and as a raw material for making plastics.