CHEMISTRY GLOSSARY

high-density polyethylene    →   polietilen visoke gustoće

High-density polyethylene (HDPE) is a thermoplastic polyolefin with a density of from 0.941 g/cm³ to 0.960 g/cm³. It is a recyclable plastic, used for items such as milk containers, detergent containers, and base cups of plastic soft drink bottles. HDPE has a high degree of resistance to chemicals, is easy to keep clean, and easily welded.

low-density polyethylene    →   polietilen niske gustoće

Low-density polyethylene (LDPE) is a thermoplastic polyolefin with a density of 0.910-0.940 g cm^-3. It is a recyclable plastic used predominantly in film applications due to its toughness, flexibility and relative transparency. LDPE has a low melting point, making it popular for use in applications where heat sealing is necessary. Typically, LDPE is used to manufacture flexible films such as those used for plastic retail bags and garment dry cleaning and grocery bags.

HDPE    →   HDPE

HDPE is an abbreviation for high-density polyethylene.

PE    →   PE

PE is an abbreviation for polyethylene, usually abbreviated as HDPE (High Density Polyethylene), MDPE (Medium Density Polyethylene), and LDPE (Low Density Polyethylene).

wash bottle    →   boca štrcaljka

Plastic wash bottle is a squeeze bottle made of low density polyethylene (LDPE) whose contents can be forced out through a narrow hole at the top by squeezing the bottle.

Glass wash bottle is a bottle fitted with two glass tubes pass through the cap, so that on blowing into one of the tubes a stream of water issuing from the other may be directed upon anything to be washed or rinsed, as a precipitate upon a filter.

Ziegler process    →   Zieglerov proces

Ziegler process is an industrial process for the manufacture of high-density polyethene using catalysts of titanium(IV) chloride (TiCl₄) and aluminium alkyls (e.g. triethylaluminium, Al(C₂H₅)₃). The process was introduced in 1953 by the German chemist Karl Ziegler (1898-1973). It allowed the manufacture of polythene at lower temperatures (about 60 °C) and pressures (about 1 atm) than used in the original process.

blast furnace    →   visoka peć

Blast furnace is a furnace for smelting of iron from iron oxide ores (hematite, Fe₂O₃ or magnetite, Fe₃O₄). Coke, limestone and iron ore are poured in the top, which would normally burn only on the surface. The hot air blast to the furnace burns the coke and maintains the very high temperatures that are needed to reduce the ore to iron. The reaction between air and the fuel generates carbon monoxide. This gas reduces the iron(III) oxide in the ore to iron.

Because the furnace temperature is in the region of 1500 °C, the metal is produced in a molten state and this runs down to the base of the furnace.

The production of iron in a blast furnace is a continuous process. The furnace is heated constantly and is re-charged with raw materials from the top while it is being tapped from the bottom. Iron making in the furnace usually continues for about ten years before the furnace linings have to be renewed.

density    →   gustoća

In the most common usage, density (ρ) is mass density or mass per unit volume. In Si units it is measured in kg m^-3. More commonly, densities are given in kg dm^-3.

More generally, it is the amount of some quantity (mass, charge, energy, etc.) divided by a length, area, or volume.

Relative density is the ratio of the density of a substance to the density of some reference substance. For liquids or solids, it is the ratio of the density (usually at 20 °C) to the density of water at 4 °C. This quantity was formerly called specific gravity.

high fructose corn syrup    →   visoko fruktozni kukuruzni sirup

High fructose corn syrup (HFCS) is commonly used in place of sugar in foods and drinks. Corn starch is hydrolyzed to glucose, which is then treated with glucose isomerase to produce a fructose-rich mixture. HFCS is available in a number of forms, named according to the percentage of fructose they contain, HFCS-55 for instance contains 55 % fructose and 45 % glucose. The enhanced sweetness, low cost and ease of use are the main reasons why manufacturers now prefer to use high fructose corn syrup instead of sugar.

relative density    →   relativna gustoća

Relative density (d) is the ratio of the density of a substance to the density of some reference substance. For liquids or solids it is the ratio of the density (usually at 20 °C) to the density of water at 4 °C. Since one must specify the temperature of both the sample and the water to have a precisely defined quantity, the use of this term is now discouraged. This quantity was formerly called specific gravity.