CHEMISTRY GLOSSARY

low-density polyethylene    →   polietilen niske gustoće

Low-density polyethylene (LDPE) is a thermoplastic polyolefin with a density of 0.910-0.940 g cm^-3. It is a recyclable plastic used predominantly in film applications due to its toughness, flexibility and relative transparency. LDPE has a low melting point, making it popular for use in applications where heat sealing is necessary. Typically, LDPE is used to manufacture flexible films such as those used for plastic retail bags and garment dry cleaning and grocery bags.

high-density polyethylene    →   polietilen visoke gustoće

High-density polyethylene (HDPE) is a thermoplastic polyolefin with a density of from 0.941 g/cm³ to 0.960 g/cm³. It is a recyclable plastic, used for items such as milk containers, detergent containers, and base cups of plastic soft drink bottles. HDPE has a high degree of resistance to chemicals, is easy to keep clean, and easily welded.

LDPE    →   LDPE

LDPE is an abbreviation for low-density polyethylene.

PE    →   PE

PE is an abbreviation for polyethylene, usually abbreviated as HDPE (High Density Polyethylene), MDPE (Medium Density Polyethylene), and LDPE (Low Density Polyethylene).

wash bottle    →   boca štrcaljka

Plastic wash bottle is a squeeze bottle made of low density polyethylene (LDPE) whose contents can be forced out through a narrow hole at the top by squeezing the bottle.

Glass wash bottle is a bottle fitted with two glass tubes pass through the cap, so that on blowing into one of the tubes a stream of water issuing from the other may be directed upon anything to be washed or rinsed, as a precipitate upon a filter.

density    →   gustoća

In the most common usage, density (ρ) is mass density or mass per unit volume. In Si units it is measured in kg m^-3. More commonly, densities are given in kg dm^-3.

More generally, it is the amount of some quantity (mass, charge, energy, etc.) divided by a length, area, or volume.

Relative density is the ratio of the density of a substance to the density of some reference substance. For liquids or solids, it is the ratio of the density (usually at 20 °C) to the density of water at 4 °C. This quantity was formerly called specific gravity.

relative density    →   relativna gustoća

Relative density (d) is the ratio of the density of a substance to the density of some reference substance. For liquids or solids it is the ratio of the density (usually at 20 °C) to the density of water at 4 °C. Since one must specify the temperature of both the sample and the water to have a precisely defined quantity, the use of this term is now discouraged. This quantity was formerly called specific gravity.

HDPE    →   HDPE

HDPE is an abbreviation for high-density polyethylene.

diatomaceous earth    →   dijatomejska zemlja

Diatomaceous earth is a naturally occurring siliceous sedimentary mineral compound from microscopic skeletal remains (frustules) of diatoms, unicellular aquatic plants of microscopic size. Their fossilized remains are called diatomite and contains approximately 3000 diatom frustules per cubic millimetre.

Diatomite is relatively inert and has a high absorptive capacity, large surface area, and low bulk density. It consists of approximately 90 % silica, and the remainder consists of compounds such as aluminum and iron oxides. The fine pores in the diatom frustules make diatomite an excellent filtering material for waters, beverages, oils, chemicals, as well as many other products.

supercritical fluid    →   superkritični fluid

Supercritical fluid is any substance above its critical temperature and critical pressure (see phase diagram). It shows unique properties that are different from those of either gases or liquids under standard conditions. A supercritical fluid has both the gaseous property of being able to penetrate anything, and the liquid property of being able to dissolve materials into their components. Solublity increases with increasing density (i.e. with increasing pressure). An example of this is naphthalene which is practically insoluble in low pressure carbon dioxide. At 100 bar the solubility is 10 g/L and at 200 bar it is 50 g/L. Rapid expansion of supercritical solutions leads to precipitation of a finely divided solid.