CHEMISTRY GLOSSARY

non-soap cleanser    →   nesapunsko sredstvo za čišćenje

Non-soap cleansers (detergents) are synthetically produced from byproducts of oil refining and are used in the production of washing powder, shampoos and hair conditioners.

chemical cleaning    →   kemijsko čišćenje

Chemical cleaning is a removal of fatty and other impurities combined with it from fabrics with the help of organic solvents.

reducing agent    →   redukcijsko sredstvo

Reducing agent may be defined in various ways, depending upon the context in which the phrase is used. In broad terms it is often taken to mean a chemical which can act as an electron donor. Thus, in the reaction:

the zinc is being reduced (gaining electrons) by reaction with the iron cations; the Fe²⁺ in this instance is acting as a reducing agent.

desiccant dryers    →   sredstva za sušenje

Desiccant dryers (air dryers) use nonconsumable chemicals such as silica gel or active alumina, and can remove almost all the moisture from compressed air by adsorbing moisture on its surface. The method of regeneration, the process of removing adsorbed water from the desiccant, is the primary distinguishing feature among the various types of desiccant dryers. There are three ways to regenerate a desiccant: with air, internal or external heaters, or a heat pump.

freon    →   freon

Freon (chlorofluorocarbon, CFC) a type of compound in which some or all of the hydrogen atoms of hydrocarbon (usually an alkane) have been replaced by chlorine and fluorine atoms. Most CFC are chemically uncreative and are stable at high temperatures. They are used as aerosol propellants, refrigerants, and solvents, and in the manufacture of rigid packaging foam. CFC because of their chemical inertness, can diffuse unchanged into the upper atmosphere. Here, photochemical reactions cause them to break down and react with ozone. For his reason, their use has been discouraged.

abrasive    →   abraziv

Abrasive is a very hard, brittle, heat-resistant substance that is used to grind the edges or rough surfaces of an object. Boron carbide, diamond, and corundum are abrasive.

activated charcoal    →   aktivni ugljen

Activated charcoal or activated carbon is charcoal that has been activated for adsorption by steaming or by heating in a vacuum. Charcoal is obtained by burning wood, nutshells, coconut husks or other materials. Charcoal becomes activated by heating it with steam to approximately 1000 °C in the absence of oxygen.

The chemical nature of amorphous carbon, combined with a high surface area makes it an ideal medium for the adsorption of organic chemicals. A single gram of such material can have 400 m² to 1 200 m² square meters of surface area. Activated charcoal is widely used to decolorize liquids, recover solvents, and remove toxins from water and air.

aerogel    →   aerogel

Aerogel is a low-density porous transparent material that consists of more than 90 % air. Usually based on metal oxides or silica, aerogels are used as drying agents and insulators.

aerosol    →   aerosol

Aerosols are colloidal dispersions of liquid or solid particles in a gas, as in a mist or smoke. The commonly used aerosol sprays contain an inert propellant liquefied under pressure. The pressure of the gas causes the mixture to be released as a fine spray (aerosol) or foam (aerogel) when a valve is opened.

antacid    →   antacid

Antacid is any mildly alkaline substance, such as sodium bicarbonate, taken internally or in water solution to neutralize excess stomach acidity.