CHEMISTRY GLOSSARY

thermit welding    →   termitno zavarivanje

Thermit welding is a group of welding processes in which fusion is produced by heating with superheated liquid metal resulting from a chemical reaction between a metal oxide and aluminium.

welding    →   varenje

Welding is a process of joining of two metal surfaces that have been heated, melted, and fused together.

Goldschmidt process    →   Goldschmidtov postupak

Goldschmidt process (thermite process) is a method of extracting metals by reducing the oxide with aluminium powder. Practically all the metallic oxides are reducible by this method, the chief exception being the oxide of magnesium. The thermite process was developed by the German chemist Hans Goldschmidt (1861-1923) in 1893.

Goldschmidt was originally interested in producing very pure metals, but he soon realized the value in welding, a process known as Thermit welding.

hafnium    →   hafnij

Hafnium was discovered by Dirk Coster (Denmark) and Georg Karl von Hevesy (Hungary) in 1923. The origin of the name comes from the Latin name Hafnia meaning Copenhagen. It is silvery, ductile metal. Exposed surfaces form oxide film. Resists alkalis and acids (except HF). Toxic. Metal ignites and burns readily. Hafnium is obtained from mineral zircon or baddeleyite. Used in reactor control rods because of its ability to absorb neutrons.

hydrogen    →   vodik

Hydrogen was discovered by Sir Henry Cavendish (England) in 1766. The origin of the name comes from the Greek words hydro and genes meaning water and generate. It is colourless, odourless gas, burns and forms explosive mixtures in air. Reacts violently with oxidants. Hydrogen is the most abundant element in the universe. Commercial quantities of hydrogen are produced by reacting superheated steam with methane or carbon. In lab work from reaction of metals with acid solutions or electrolysis. Most hydrogen is used in the production of ammonia and in metal refining. Also used as fuel in rockets. Its two heavier isotopes (deuterium and tritium) used respectively for nuclear fusion.

ligand    →   ligand

Ligand is an ion (F^-, Cl^-, Br^-, I^-, S^2-, CN^-, NCS^-, OH^-, NH₂^-) or molecule (NH₃, H₂O, NO, CO) that donates a pair of electrons to a metal atom or ion in forming a coordination complex. The main way of classifying ligands is by the number of points at which they are attached to, or bound to, the metal center. This is the denticity. Ligands with one potential donor atom are monodentate. Polydentate ligand is a ligand that is attached to a central metal ion by bonds from two or more donor atoms. Ligands with more than one potential donor atom are known as ambidentate, such as the thiocyanate ion, NCS-, which can bind to the metal center with either the nitrogen or sulphur atoms. Chelating ligands are those polydentate ligands which can form a ring including the metal atom.

magnesium    →   magnezij

Magnesium was discovered by Sir Humphry Davy (England) in 1808. The origin of the name comes from the Greek word Magnesia, a district of Thessaly. It is lightweight, malleable, silvery-white metal. Burns in air with a brilliant white flame and reacts with water as temperature elevates. Can ignite in air. React violently with oxidants. Magnesium is found in large deposits in the form of magnesite, dolomite and other minerals. It is usually obtained by electrolysis of melted magnesium chloride (MgCl₂) derived from brines, wells and sea water. Used in alloys to make airplanes, missiles and other uses for light metals. Have structural properties similar to aluminium.

metal    →   metal

Metals are materials in which the highest occupied energy band (conduction band) is only partially filled with electrons.

Their physical properties generally include:

- They are good conductors of heat and electricity. The electrical conductivity of metals generally decreases with temperature.

- They are malleable and ductile in their solid state.

- They show metallic lustre.

- They are opaque.

- They have high density.

- They are solids (except mercury)

- They have a crystal structure in which each atom is surrounded by eight to twelve near neighbours

Their chemical properties generally are:

- They have one to four valence electrons.

- They have low ionisation potentials; they readily lose electrons.

- They are good reducing agents.

- They have hydroxides which are bases or amphoteric.

- They are electropositive.

Metallic characteristics of the elements decrease and non-metallic characteristics increase with the increase of valence electrons. Also metallic characteristics increase with the number of electron shells. Therefore, there is no sharp dividing line between the metals and non-metals.

Of the 114 elements now known, only 17 show primarily non-metallic characteristics, 7 others are metalloids, and 89 may be classed as metals.

non-metal    →   nemetal

Non-metals are defined as elements that are not metals.

Their physical properties generally include:

• They are poor conductors.
• They are brittle, not ductile in their solid state.
• They show no metallic lustre.
• They may be transparent or translucent.
• They have low density.
• They form molecules which consists of atoms covalently bonded; the noble gases are monoatomic.

Their chemical properties are generally:

• They usually have four to eight valence electrons.
• They have high electron affinities (except the noble gases)
• They are good oxidising agents (except the noble gases)
• They have hydroxides which are acidic (except the noble gases)
• They are electronegative.

nuclear reactor    →   nuklearni reaktor

Nuclear reactor is an assembly of fissionable material (uranium-235 or plutonium-239) designed to produce a sustained and controllable chain reaction for the generation of electric power.

The essential components of a nuclear reactor are:

1. The core, metal rods containing enough fissionable material to maintain a chain reaction at the necessary power level (as much as 50 t of uranium may be required).
2. A source of neutrons to initiate the reaction (such as a mixture of polonium and beryllium)
3. A moderator to reduce the energy of fast neutrons for more efficient fission (material such as graphite, beryllium, heavy water, and light water are used)
4. A coolant to remove the fission-generated heat (water, sodium, helium, and nitrogen may be used)
5. A control system such as rods of boron or cadmium that have high capture cross sections (to absorb neutrons)
6. Adequate shielding, remote-control equipment, and appropriate instrumentation are essential for personnel safety and efficient operation.