CHEMISTRY GLOSSARY

magnesium    →   magnezij

Magnesium was discovered by Sir Humphry Davy (England) in 1808. The origin of the name comes from the Greek word Magnesia, a district of Thessaly. It is lightweight, malleable, silvery-white metal. Burns in air with a brilliant white flame and reacts with water as temperature elevates. Can ignite in air. React violently with oxidants. Magnesium is found in large deposits in the form of magnesite, dolomite and other minerals. It is usually obtained by electrolysis of melted magnesium chloride (MgCl₂) derived from brines, wells and sea water. Used in alloys to make airplanes, missiles and other uses for light metals. Have structural properties similar to aluminium.

abundance of elements    →   rasprostranjenost elemenata

Elements in nature are mostly found in different compounds and, rarely, in the free (elementary) state. In Earth’s crust the most abundant of all elements is oxygen (with 49.5 %), then silicon (25 %), aluminium (7.5 %), iron (4.7 %), calcium (3.4 %), sodium (2.6 %), potassium (2.4 %), magnesium (1.9 %) and hydrogen (1.9 %). These nine elements make up almost 99 % of the Earth’s composition.

alkaline earth metal    →   zemnoalkalijski metal

Alkali earth metal is a term that refers to six elements: beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). These elements make up group 2 of the periodic table of elements. They all exhibit a single oxidation state, +2. They are all light and very reactive. Barium and radium are the most reactive and beryllium is the least.

To denote slightly soluble metal oxides chemists formerly used the term "earth". The oxides of barium, strontium, and calcium resemble alumina (Al₂O₃), a typical "earth", but form alkaline mixtures with water. For this reason barium, strontium, and calcium were called alkaline earth metals. This name has now been extended to include all of the elements of group 2.

antacid    →   antacid

Antacid is any mildly alkaline substance, such as sodium bicarbonate, taken internally or in water solution to neutralize excess stomach acidity.

borane    →   borani

Borane is any of the group of compounds of boron and hydrogen (B₂H₆, B₄H₁₀, B₅H₉, B₅H₁₁...), many of which can be prepared by action of acid on magnesium boride (Mg₃B₂). Boranes are a remarkable group of compounds in that their structures cannot be described using the conventional two-electron covalent bond model.

bromine    →   brom

Bromine was discovered by Antoine J. Balard (France) in 1826. The origin of the name comes from the Greek word bromos meaning stench. It is reddish-brown liquid with suffocating, irritating fumes. Gives off poisonous vapour. Causes severe burns. Oxidizer. Bromine occurs in compounds in sea water. It was once used in large quantities to make a compound that removed lead compound build up in engines burning leaded gasoline. Now it is primarily used in dyes, disinfectants and photographic chemicals.

dolomite    →   dolomit

Dolomite is a carbonate mineral consisting of a mixed calcium-magnesium carbonate, CaCO₃·MgCO₃, crystallising in the rhombohedral system. It is usually white or colourless. The term is also used to denote a rock with a high ratio of magnesium to calcium carbonate.

limescale    →   kamenac

Limescale (or scale) is a flaky deposit left in hot-water pipes and appliances, especially those that contain heating elements (washing machines, dishwashers, water heaters). Limescale is mainly made up of calcium and magnesium carbonate.

permanent hardness    →   stalna tvrdoća

Permanent hardness in water is hardness due to the presence of the chlorides, nitrates and sulphates of calcium and magnesium, which will not be precipitated by boiling. The lime scale can build up on the inside of the pipe restricting the flow of water or causing a blockage. This can happen in industry where hot water is used.

cathodic protection    →   katodna zaštita

Cathodic protection is a process in which a structural metal, such as iron, is protected from corrosion by connecting it to a metal that has a more negative reduction half-cell potential, which now corrodes instead of iron. There are two major variations of the cathodic method of corrosion protection. The first is called the impressed current method, and the other is called the sacrificial anode method.