CHEMISTRY GLOSSARY

gasohol    →   gasohol

Gasohol (E10) is an alternative fuel consisting of a mixture of typically 90 % gasoline with 10 % anhydrous ethanol. It can be used in the internal combustion engines of most modern automobiles and light-duty vehicles without need for any modification on the engine or fuel system.

Celsius temperature scale    →   Celsiusova temperaturna skala

For value of zero in Celsius temperature scale the freezing point of water at a pressure of 101 325 Pa is taken. The boiling point of water at a pressure of 101 325 Pa is taken as another reference point. This range is divided into 100 equal parts, and each part is an equivalent to 1 °C. Units of Celsius temperature scale (°C) and thermodynamic temperature scale (K) are identical

1 °C = 1 K.

chemical change    →   kemijska promjena

Chemical change is a process which results in the production of one or more new materials. The system within which the process takes place is called a chemical system. A chemical change is also known as a chemical reaction, where one substance is converted into one or more different substances. When sodium and chlorine react to produce sodium chloride, a chemical reaction has taken place.

colloid    →   koloid

Colloids are systems in which there are two or more phases, with one (the dispersed phase) distributed in the other (the continuous phase). Moreover, at least one of the phases has small dimensions, in the range between 1 nm and 1 μm (10^-9 m – 10^-6 m). Dimension, rather than the nature of the material, is characteristic. In this size range, the surface area of the particle is large with respect to its volume so that unusual phenomena occur, e.g., the particles do not settle out of the suspension by gravity and are small enough to pass through filter membranes. Macromolecules (proteins and other high polymers) are at the lower limit of this range; the upper limit is usually taken to be the point at which the particles can be resolved in an optical microscope.

Colloidal particles may be gaseous, liquid, or solid, and occur in various types of suspensions:

Sols - dispersions of small solid particles in a liquid.

Emulsions - colloidal systems in which the dispersed and continuous phases are both liquids.

Gels - colloids in which both dispersed and continuous phases have a three-dimensional network throughout the material.

Aerosols - colloidal dispersions of liquid or solid particles in a gas.

Foams - dispersions of gases in liquids or solids.

gel    →   gel

Gels are colloids in which both dispersed and continuous phases have a three-dimensional network throughout the material, so that it forms a jelly-like mass (e.g. gelatine). One component may sometimes be removed to leave a rigid gel (e.g. heating silica gel).

heat of reaction    →   toplina kemijske reakcije

Heat of reaction or enthalpy of reaction is the heat evolved or absorbed as a result of the complete chemical reaction of molar amounts of the reactants.

hecto    →   hekto

Hecto, symbol h, is a prefix used in the metric system to denote 100 times. For example, 100 c = 1 hC.

condensation    →   kondenzacija

1. Condensation is a process of changing from a gaseous to a liquid or solid state, usually done by cooling.

2. Condensation, in colloid systems, is a process where smaller particle join in one colloid size particle

3. Condensation, in chemical terms, is a sort of chemical reaction in which small molecules like water, carbon dioxide, or ammonia single out.

critical point    →   kritična točka

In general, critical point is the point on the phase diagram of a two-phase system at which the two coexisting phases have identical properties and therefore represent a single phase. At the liquid-gas critical point of a pure substance, the distinction between liquid and gas vanishes, and the vapour pressure curve ends. The coordinates of this point are called the critical temperature and critical pressure. Above the critical temperature it is not possible to liquefy the substance.

differential thermal analysis    →   diferencijalna termalna analiza

Differential thermal analysis (DTA) is a technique that is often used to analyze materials that react or decompose at higher temperatures. The difference in temperature between the sample and an inert reference material is monitored as both are heated in a furnace. Phase transitions and chemical reactions taking place in the sample on heating cause the temperature difference to become larger, at temperatures that are characteristic of the sample.