CHEMISTRY GLOSSARY

phase    →   faza

Phase is a portion of a physical system (solid, liquid, gas) that is homogeneous throughout, has definable boundaries, and can be separated physically from other phases.

air    →   zrak

Air that we breathe is a mixture of gases. The composition of dry-air at sea level is shown below:

angular acceleration    →   kutna akceleracija

If the angular velocity of a body changes from an initial value ω_i to a final value ω_f, average angular acceleration, α, can be defined for the time interval Δt = t_f - t_i:

The instantaneous angular acceleration, α, is the limit of the average angular acceleration, as Δt is made to approach zero:

SI unit for angular acceleration is s^-2.

atom radius    →   radijus atoma

Atoms and molecules have no strict boundaries. The volume of a free atom is usually defined as that volume that contains 90 % of electron cloud. The radius of an atom represents half of interatom distance of two identical atoms which are in touch but are not interconnected either by a covalent or an ionic bond, but with a very weak van der Waals’s bond.

system    →   sustav

System is the region under consideration, as distinguished from the rest of the universe (the environment). Systems may be separated from environments by boundaries that prevent the transfer of mass (a closed system), of heat (an adiabatic system), or of any energy (an isolated system). Systems that exchange mass with the environment are open systems.

zeta potential    →   zeta potencijal

Zeta potential (ζ) is the potential across the interface of all solids and liquids. Specifically, the potential across the diffuse layer of ions surrounding a charged colloidal particle, which is largely responsible for colloidal stability. Also called electrokinetic potential.

angular velocity    →   kutna brzina

A point-like object that undergoes circular motion changes its angular position from initial Θ_i to final Θ_f, relative to a fixed axis, specified in a coordinate system with an origin that coincides the centre of the circular path of object. The change in its angular position is called angular displacement ΔΘ = Θ_f - Θ_i. Also, a rigid body that rotates about a specified rotation axis, changing its angular position from initial Θ_i to final Θ_f, undergoes an angular displacement ΔΘ.

The average angular velocity, ω_av, is the ratio of the angular displacement and the time interval Δt=t_f-t_i, in which that displacement occurs.

Θ_f and Θ_i are the initial and final angular position, respectively.

The instantaneous angular velocity ω is the limit of the average angular velocity, as Δt is made to approach zero.

ω_av and ω are positive for the counterclockwise rotation (in direction of increasing Θ) and negative for the clockwise rotation (in direction of decreasing Θ).

SI unit for angular velocity is s^-1.The measure for the angle Θ is radian. The relationship between radians and degrees is:

For example, the angular velocity of the minute hand of a clock is:

burette    →   bireta

Burette is a graded glass pipe which on its lower side has a glass faucet by which it can drop a precise quantity of liquid. Inner diameter of a burette must be equal in its whole length, because the accuracy of volume measurement depends upon that. Burettes are primarily used in volumetric analysis for titration with standard solution reagent. Most often Schellbach’s burette is used, graded on 50 mL with division of scale on 0.1 mL. Every burette is calibrated on discharge. For serial determining automatic burettes are used.

distilled water    →   destilirana voda

Distilled water is water purified by distillation so as to free it from dissolved salts and other compounds. Distilled water in equilibrium with the carbon dioxide in the air has conductivity of about 0.8×10^-6 S cm^-1. Repeated distillation in vacuum can bring conductivity down to 0.043×10^-6 S cm^-1 at 18 °C. The limiting conductivity is due to self ionisation

freon    →   freon

Freon (chlorofluorocarbon, CFC) a type of compound in which some or all of the hydrogen atoms of hydrocarbon (usually an alkane) have been replaced by chlorine and fluorine atoms. Most CFC are chemically uncreative and are stable at high temperatures. They are used as aerosol propellants, refrigerants, and solvents, and in the manufacture of rigid packaging foam. CFC because of their chemical inertness, can diffuse unchanged into the upper atmosphere. Here, photochemical reactions cause them to break down and react with ozone. For his reason, their use has been discouraged.