CHEMISTRY GLOSSARY

Results 61–70 of 163 for X-zrake

spontaneously combustible → samozapaljivi materijal

Spontaneously combustible materials are materials that can ignite without an external source of heat. Heat sufficient to reach the ignition temperature may be generated by reaction with oxygen in the air, by the absorption of moisture, from heat generated during processing, or even from radioactive decay.

swamp gas → močvarni plin

Swamp gas is a gas which develops by rottening of organic matter with no presence of air at all, e.g. at bottom of the swamp. The chief component is methane (CH₄).

tempering → kaljenje

Tempering is a rapid cooling of metals (often steels) from a suitable elevated temperature, thus changing its properties, e.g. steel becomes harder. This is generally accomplished by immersion in water, oil, polymer solution, or salt, although forced air is sometimes used.

thermionic emission → termionska emisija

Thermionic emission is the boiling off of electrons from heated metals. It gives a source of electrons for cathode ray tubes.

Tyndall’s effect → Tyndallov efekt

Tyndall’s effect occurs when light disperses on colloid particles. This phenomenon can be seen when a ray of light enters in dark room through a small hole. In the beam some dust particles of colloid dimensions can be seen sparkling.

copper → bakar

Copper has been known since ancient times. The origin of the name comes from the Latin word cuprum meaning the island of Cyprus famed for its copper mines. It is malleable, ductile, reddish-brown metal. Resistant to air and water. Exposed surfaces form greenish carbonate film. Pure copper occurs rarely in nature. Usually found in sulfides as in chalcopyrite (CuFeS₂), coveline (CuS), chalcosine (Cu₂S) or oxides like cuprite (Cu₂O). Most often used as an electrical conductor. Also used in the manufacture of water pipes. Its alloys are used in jewellery and for coins.

cryogenic fluid → kriogenski fluid

Cryogenic fluids are used for accessing low temperatures, usually below -150 °C. Cryogenic temperatures are achieved by the rapid evaporation of volatile liquids. The most common laboratory cryogenic fluids are liquid nitrogen (-196 °C). Nitrogen gas is colorless and odorless. The cloud formed when pouring liquid nitrogen is condensed water vapour from the air, not nitrogen gas.

cryogenic fractionation → kriogena frakcinacija

Cryogenic fractionation is a process of separation of gases by cooling them until they enter their liquid state. Large scale gas production companies use this method to produce liquid oxygen, liquid nitrogen etc. Gases have different boiling points (the temperature at which they change from liquid to gas). Oxygen has a boiling point of -183 °C, and nitrogen a boiling point of -195.8 °C. Therefore by cooling the gas mixture to -183 °C, the oxygen can be collected as liquid and the nitrogen remains its gaseous form.

desiccant dryers → sredstva za sušenje

Desiccant dryers (air dryers) use nonconsumable chemicals such as silica gel or active alumina, and can remove almost all the moisture from compressed air by adsorbing moisture on its surface. The method of regeneration, the process of removing adsorbed water from the desiccant, is the primary distinguishing feature among the various types of desiccant dryers. There are three ways to regenerate a desiccant: with air, internal or external heaters, or a heat pump.

desiccator → eksikator

Desiccator is a glass container with dry atmosphere due to the presence of some dehydrating agent. It is used for protecting the samples, reagents or precipitates from humidity. As dehydrating agent usually waterless calcium chloride (CaCl₂) is used.

→ Download high quality image

Citing this page:

Generalic, Eni. "X-zrake." Croatian-English Chemistry Dictionary & Glossary. 29 June 2022. KTF-Split. {Date of access}. <https://glossary.periodni.com>.