CHEMISTRY GLOSSARY

joule    →   džul

Joule (J) is the SI derived unit of energy, work, and heat. The joule is the work done when the point of application of a force of one newton is displaced a distance of one metre in the direction of the force (J = N m). The unit was named after the British scientist James Prescott Joule (1818-1889).

Joule-Thomson coefficient    →   Joule-Thompsonov koeficijent

Joule-Thomson coefficient (μ) is a parameter which describes the temperature change when a gas expands adiabatically through a nozzle from a high pressure to a low pressure region. It is defined by

where H is enthalpy.

Joule-Thomson’s effect    →   Joule-Thomsonov efekt

Temperature of ideal gas will not be changed when it is repressed to a lower pressure, but when real gases are repressed to a lower pressure, a lower or higher temperature change appears under high pressures. The temperature change which appears at real gas expansion in a system into which energy is not brought is called Joule-Thomson’s effect. It was determined that when air is repressed by 1 bar, its temperature drops by 0.25 °C. That minute effect is completely irrelevant for most technical processes, but is also used in gas liquefying procedure.

energy    →   energija

Energy (E, U) is the characteristic of a system that enables it to do work. Like work itself, it is measured in joules (J).

The internal energy of a body is the sum of the potential energy and the kinetic energy of its component atoms and molecules.

Potential energy is the energy stored in a body or system as a consequence of its position, shape, or state (this includes gravitation energy, electrical energy, nuclear energy, and chemical energy).

Kinetic energy is the energy of motion and is usually defined as the work that will be done by a body possessing the energy when it is brought to rest. For a body of mass m having a speed v, the kinetic energy is mv²/2. Kinetic energy is most clearly exhibited in gases, in which molecules have much greater freedom of motion than in liquids and solids.

In an isolated system energy can be transferred from one form to another but the total energy of the system remains constant.

gas liquefying    →   ukapljivanje plinova

In order to achieve transition of a gas into liquid state it is necessary to lower its temperature, or decrease its volume, or increase its pressure. Above the critical temperature it is impossible to liquefy a gas. When liquefying a gas by Linde’s procedure, dampening or Joule-Thomson’s effect is used. First, the compressed air from the compressor is cooled with cooling water, the cooled air expands at a lower pressure in the dampening valve at which it cooled. The cooled air now returns to the compressor, cooling down the expanding air. By repeating this process the air is cooled enough to transit to the liquid state.

gray    →   grej

Gray (Gy) is the SI derived unit of absorbed dose of radiation. The gray is the absorbed dose when the energy per unit mass imparted to matter by ionising radiation is one joule per kilogram (Gy = J/kg). The unit was named after the British scientist Louis Harold Gray (1905-1965).

watt    →   vat

Watt (W) is the SI derived unit of power. One watt is a power of one joule per second (W = J/s). It was named after the Scottish engineer James Watt (1736-1819).

work    →   rad

Work is the energy required to move an object against an opposing force. Work is usually expressed as a force times a displacement.

When a constant force F acts on a point-like object while the object moves through a displacement s, the force does work W on the object. If force and displacement are at a constant angle Θ to each other, the work is expressed by the scalar product of these two vectors:

When the force F on a point-like object is not constant that is, it depends on the position of the object, the work done by force while object moves from initial position with coordinates (x_i, y_i, z_i) to final position with coordinates (x_f, y_f, z_f)is given by expression:

Where F_x, F_y and F_z are scalar components of the force.

SI unit for work is joule (J); 1 J = 1 Nm = 1 kg m² s^-2. The electron-volt (eV) is commonly used in atomic and nuclear physics.