CHEMISTRY GLOSSARY

Born-Haber cycle    →   Born-Haberov kružni proces

Born-Haber cycle is a cycle of reactions used for calculating the lattice energies of ionic crystalline solids. For a compound MX, the lattice energy is the enthalpy of the reaction

The standard enthalpy of formation of the ionic solid is the enthalpy of the reaction

The cycle involves equating this enthalpy (which can be measured) to the sum of the enthalpies of a number of steps proceeding from the elements to the ionic solid. The steps are:

1) Atomization of the metal

2) Atomization of the nonmetal

3) Ionisation of the metal

This is obtained from the ionisation potential.

4) Ionisation of the nonmetal

This is electron affinity.

5) Formation of the ionic solids

Equation of the enthalpies gives

from which ΔH_L can be found.

Frasch proces    →   Fraschov postupak

Frasch proces is a method of obtaining sulphur from underground deposits using a tube consisting of three concentric pipes. Superheated steam is passed down the outer pipe to melt the sulphur, which is forced up through the middle pipe by compressed air fed through the inner tube. The steam in the outer casing keeps the sulphur molten in the pipe. It was named after the German-born American chemist Herman Frasch (1851-1914).

Acheson process    →   Achesonov proces

Acheson process is an industrial process to synthesize graphite and silicon carbide (carborundum), named after its inventor the American chemist Edward Goodrich Acheson (1856-1931). In this process, a solid-state reaction between pure silica sand (SiO₂) and petroleum coke (C) at very high temperature (more than 2500 °C) leads to the formation of silicon carbide under the general reaction:

While studying the effects of high temperature on carborundum, Acheson had found that silicon vaporizes at about 4150 °C, leaving behind graphitic carbon.

adiabatic process    →   adijabatski proces

Adiabatic process is a thermodynamic process in which no heat enters or leaves the system. In general, an adiabatic change involves a fall or rise in temperature of the system.

basic Bessemer process    →   bazni Bessemerov proces

Basic Bessemer process is the process of steelmaking in a way that steel, melted iron and limestone are put in the blast-furnace after which the metal oxygen is released in gushes in order to oxidise the impurities.

Bordeaux mixture    →   bordoška juha

Bordeaux mixture is a mixture of copper(II) sulphate and calcium hydroxide in water, used as fungicide.

borane    →   borani

Borane is any of the group of compounds of boron and hydrogen (B₂H₆, B₄H₁₀, B₅H₉, B₅H₁₁...), many of which can be prepared by action of acid on magnesium boride (Mg₃B₂). Boranes are a remarkable group of compounds in that their structures cannot be described using the conventional two-electron covalent bond model.

boron    →   bor

Boron compounds have been known for thousands of years, but the element was not discovered until 1808 by Sir Humphry Davy (England) and independently by Joseph-Louis Gay-Lussac (France) and L. J. Thenard (France). The origin of the name comes from the Arabic word buraq and the Persian word burah meaning boraks. It is hard, brittle, lustrous black semimetal. Unreactive with oxygen, water, alkalis or acids. Combines with most metals to form borides. Boron is obtained from kernite, a kind of borax (Na₂B₄O₇·10H₂O). High purity boron is produced by electrolysis of molten potassium fluroborate and potassium chloride (KCl). Amorphous boron is used in pyrotechnic flares to provide a distinctive green color and in rockets as an igniter.

cyanide process    →   cijanidni postupak

Cyanide process is a method for separating a metal from an ore. Crushed ore is treated with cyanide ion to produce a soluble metal cyanide complex. The complex is washed out of the ore and reduced to metallic form using an active metal (usually zinc).

Haber-Bosch process    →   Haber-Boshov postupak

See Haber process