CHEMISTRY GLOSSARY

petroleum ether    →   petroleter

Petroleum ether is the petroleum fraction consisting of C₅ and C₆ hydrocarbons and boiling in the range 35 °C to 60 °C; commonly used as a laboratory solvent.

phase    →   faza

Phase is a portion of a physical system (solid, liquid, gas) that is homogeneous throughout, has definable boundaries, and can be separated physically from other phases.

phenols    →   fenoli

Phenols are compounds having one or more hydroxy groups attached to benzene or other arene ring.

photoelectric threshold    →   fotoelektrični prag

Photoelectric threshold is a maximum length of electromagnetic wave which can still cause the photoelectric effect.

photon    →   foton

Photon is an elementary particle of zero mass and spin 1/2. The photon is involved in electromagnetic interactions and is the quantum of electromagnetic radiation. The photon may also be regarded as a unit of energy equal to

where h is Planck constant and ν is the frequency of the radiation.

pigment    →   pigment

Pigments are the substances that give paint colour. Pigments are derived from natural or synthetic materials that have been ground into fine powders. A pigment is different from a dye in that a pigment is insoluble in the media in which it is used.

Pigment is an organic substance found in plant and animal cells that creates colouring.

plain salt    →   jednostavna sol

Plain salt is a salt that contains only metal ions (or ammonium ions) and acid radical. It is created when all ions of hydrogen in an acid are replaced with ions of metal (or ammonium ions).

Planck constant    →   Planckova konstanta

Planck constant (h) is a constant that, when multipled by the frequency of radiation gives the quantity of energy contained in one quantum.

Equal to 6.626 075 5(40)·10^-34 J s. It was named after Max Planck (1858-1947).

Knudsen’s pipette    →   Knudsenova pipeta

Kudsen's automatic pipette, developed by the Danish physicist Martin Knudsen (1871-1949), allows quick and accurate transfer of a constant volume of liquid (sea water), usually around 15 mL. On the top of pipette is a double sided C vent that can establish flow between the body of the pipette and one of the branches (A or B), or isolate the body of the pipette from both of the branches. Sucking through the B branch the pipette is filled with liquid, it is closed with a twist of the C valve and the liquid is released by rotating the valve towards the A branch (so atmospheric air can enter the pipette). Emptying the pipette takes around 30 seconds. Before it's first use, the pipette must be calibrated with distilled water.

plastic sulphur    →   plastični sumpor

Plastic sulphur is the shape of sulphur which emerges when hot, liquid sulphur pours out in the water. It can be stretched in long fibres is unstable unstable. It easily solidifies.