CHEMISTRY GLOSSARY

LPG    →   LPG

LPG (Liquid Petroleum Gas) is a mixture of short hydrocarbons with most of the volume being propane and butane. LPG is considered an alternative fuel that burns cleaner than petrol.

molar quantity    →   molarna veličina

Molar quantity is often convenient to express an extensive quantity (e.g., volume, enthalpy, heat capacity, etc.) as the actual value divided by the amount of substance (number of moles). The resulting quantity is called molar volume, molar enthalpy, etc.

partial pressure    →   parcijalni tlak

Partial pressure is a pressure that one component of gas mixture would have if it were alone in the same volume and at the same temperature as the mixture is in now.

specific quantity    →   specifična veličina

Specific quantity is often convenient to express an extensive quantity (e.g., volume, enthalpy, heat capacity, etc.) as the actual value divided by mass. The resulting quantity is called specific volume, specific enthalpy, etc.

chlorinity    →   klorinitet

Originally chlorinity (symbol Cl) was defined as the weight of chlorine in grams per kilogram of seawater after the bromides and iodides had been replaced by chlorides. To make the definition independent of atomic weights, chlorinity is now defined as 0.3285233 times the weight of silver equivalent to all the halides.

The Mohr-Knudsen titration method served oceanographers for more than 60 years to determine salinity from chlorinity. This modification of the Mohr method uses special volumetric glassware calibrated directly in chlorinity units. The Mohr method uses potassium chromate (K₂CrO₄) as an indicator in the titration of chloride ions chloride (plus a small amount of bromide and iodide) with a silver nitrate (AgNO₃) standard solution.

The other halides present are similarly precipitated.

A problem in the Mohr titration was that silver nitrate is not well suited for a primary standard. The Danish physicist Martin Knudsen (1871-1949) suggested that a standard seawater (Eau de mer Normale or Copenhagen Normal Water) be created and distributed to oceanographic laboratories throughout the world. This water was then used to standardize the silver nitrate solutions. In this way all chlorinity determinations were referred to one and the same standard which gave great internal consistency.

The relationship between chlorinity Cl and salinity S as set forth in Knudsen's tables is

In 1962, however, a better expression for the relationship between total dissolved salts and chlorinity was found to be

Clapeyron equation    →   Clapeyronova jednadžba

Clapeyron equation (also called the Clausius-Clapeyron equation) is a relation between pressure and temperature of two phases of a pure substance that are in equilibrium,

where Δ_trsS is the difference in entropy between the phases and Δ_trsV the corresponding difference in volume.

titrant    →   titrant

Titrant is the substance that quantitatively reacts with the analyte in a titration. The titrant is usually a standard solution added carefully to the analyte until the reaction is complete. The amount of analyte is calculated from the volume and concentration of titrant required for the complete reaction.

universal gas constant    →   univerzalna plinska konstanta

Universal gas constant R has the value of 8.314 472(15) J K^-1 mol^-1. It corresponds to the volume work performed by one mole of gas heated by 1 K at standard pressure.

vacuum    →   vakuum

Vacuum (absolute vacuum) is a volume which contains no matter.

colloid    →   koloid

Colloids are systems in which there are two or more phases, with one (the dispersed phase) distributed in the other (the continuous phase). Moreover, at least one of the phases has small dimensions, in the range between 1 nm and 1 μm (10^-9 m – 10^-6 m). Dimension, rather than the nature of the material, is characteristic. In this size range, the surface area of the particle is large with respect to its volume so that unusual phenomena occur, e.g., the particles do not settle out of the suspension by gravity and are small enough to pass through filter membranes. Macromolecules (proteins and other high polymers) are at the lower limit of this range; the upper limit is usually taken to be the point at which the particles can be resolved in an optical microscope.

Colloidal particles may be gaseous, liquid, or solid, and occur in various types of suspensions:

Sols - dispersions of small solid particles in a liquid.

Emulsions - colloidal systems in which the dispersed and continuous phases are both liquids.

Gels - colloids in which both dispersed and continuous phases have a three-dimensional network throughout the material.

Aerosols - colloidal dispersions of liquid or solid particles in a gas.

Foams - dispersions of gases in liquids or solids.