CHEMISTRY GLOSSARY

colloid    →   koloid

Colloids are systems in which there are two or more phases, with one (the dispersed phase) distributed in the other (the continuous phase). Moreover, at least one of the phases has small dimensions, in the range between 1 nm and 1 μm (10^-9 m – 10^-6 m). Dimension, rather than the nature of the material, is characteristic. In this size range, the surface area of the particle is large with respect to its volume so that unusual phenomena occur, e.g., the particles do not settle out of the suspension by gravity and are small enough to pass through filter membranes. Macromolecules (proteins and other high polymers) are at the lower limit of this range; the upper limit is usually taken to be the point at which the particles can be resolved in an optical microscope.

Colloidal particles may be gaseous, liquid, or solid, and occur in various types of suspensions:

Sols - dispersions of small solid particles in a liquid.

Emulsions - colloidal systems in which the dispersed and continuous phases are both liquids.

Gels - colloids in which both dispersed and continuous phases have a three-dimensional network throughout the material.

Aerosols - colloidal dispersions of liquid or solid particles in a gas.

Foams - dispersions of gases in liquids or solids.

colloid mill    →   koloidni mlin

Colloid mills are machines used to grind aggregates into very fine particles or to apply very high shearing within a fluid to produce colloid suspensions or emulsions in which the particle sizes are less than 1 micrometer. One type of colloid mill is called a disc mill, in which a mixture of a solid and liquid (or two liquids) is passed between two discs a small distance apart, which rotate very rapidly relative to each other. Applications of colloid mills occur in food processing, in paint manufacture, and in the pharmaceutical industry.

column chromatography    →   kromatografija u koloni

Column chromatography is generally used as a purification technique: it isolates desired compounds from a mixture. In column chromatography, the stationary phase, a solid adsorbent, is placed in a vertical column. The mobile phase, a liquid, is added to the top and flows down through the column by either gravity or external pressure. The mobile phase can be a gas or a liquid which gives rise to the two basic forms of chromatography, namely, gas chromatography (GC) and liquid chromatography (LC).

freezing    →   smrzavanje

Freezing is the change of a liquid into a solid state as the temperature decreases. For water, the freezing point is 0 °C (or 273.16 K).

freezing point    →   ledište

Freezing point is the temperature at which a liquid becomes a solid at normal atmospheric pressure.

See Melting point

glacial acetic acid    →   ledena octena kiselina

Glacial acetic acid (CH₃COOH) is the pure compound, as distinguished from the usual water solutions known as acetic acid. It is a colorless liquid or crystalline substance (melting point 16.6 °C) with a pungent, vinegar odor.

Glauber’s salt    →   Glauberova sol

Glauber’s salt is sodium sulphate decahydrate (Na₂SO₄·10H₂O). Loses water of hydration at 100 °C. Energy storage capacity is more than seven times that of water.

combustible    →   zapaljiv

The term combustible is often used to describe any material which will burn. However, conditions at which combustion will occur must be defined more accurately, for example a combustible liquid is 37.8 °C but below 93.3 °C. This allows a distinction to be made between combustible materials, which are fairly difficult to ignite, and flammable or highly flammable ones, which are far easier to ignite.

condensation    →   kondenzacija

1. Condensation is a process of changing from a gaseous to a liquid or solid state, usually done by cooling.

2. Condensation, in colloid systems, is a process where smaller particle join in one colloid size particle

3. Condensation, in chemical terms, is a sort of chemical reaction in which small molecules like water, carbon dioxide, or ammonia single out.

copper    →   bakar

Copper has been known since ancient times. The origin of the name comes from the Latin word cuprum meaning the island of Cyprus famed for its copper mines. It is malleable, ductile, reddish-brown metal. Resistant to air and water. Exposed surfaces form greenish carbonate film. Pure copper occurs rarely in nature. Usually found in sulfides as in chalcopyrite (CuFeS₂), coveline (CuS), chalcosine (Cu₂S) or oxides like cuprite (Cu₂O). Most often used as an electrical conductor. Also used in the manufacture of water pipes. Its alloys are used in jewellery and for coins.