CHEMISTRY GLOSSARY

burette    →   bireta

Burette is a graded glass pipe which on its lower side has a glass faucet by which it can drop a precise quantity of liquid. Inner diameter of a burette must be equal in its whole length, because the accuracy of volume measurement depends upon that. Burettes are primarily used in volumetric analysis for titration with standard solution reagent. Most often Schellbach’s burette is used, graded on 50 mL with division of scale on 0.1 mL. Every burette is calibrated on discharge. For serial determining automatic burettes are used.

electromotive force    →   elektromotorna sila

Electromotive force (e.m.f. or E_MF) is the difference in electric potential that exists between two dissimilar electrodes immersed in the same electrolyte or otherwise connected by ionic conductors.

electron volt    →   elektronvolt

Electron volt (eV) is a non-SI unit of energy used in atomic and nuclear physics, equal to approximately 1.602 177×10^-19 J. The electron volt is defined as the kinetic energy acquired by an electron upon acceleration through a potential difference of 1 V.

Butler-Volmer equation    →   Butler-Volmerova jednadžba

Butler-Volmer equation is an activation controlled reaction, the one for which the rate of reaction is controlled solely by the rate of the electrochemical charge transfer process, which is in turn an activation-controlled process. This gives rise to kinetics that are described by the Butler-Volmer equation:

where i_o is exchange current density, η is overpotential (η = E - E_o), n is number of electrons, α_A is anodic transfer coefficient, and α_C is cathodic transfer coefficient

Faradaic reaction    →   Faradejska reakcija

Faradaic reaction is a heterogeneous charge-transfer reaction occurring at the surface of an electrode.

heat of formation    →   toplina nastajanja

Heat of formation or enthalpy of is formation the heat evolved or absorbed when one mole of a compound is formed in its standard state from its constituent elements.

molar volume    →   molarni volumen

Molar volume is the volume occupied by substance per unit amount of substance. The volume of the gas at 0 °C and 101 325 Pa is 22.4 dm³mol^-1.

chlorinity    →   klorinitet

Originally chlorinity (symbol Cl) was defined as the weight of chlorine in grams per kilogram of seawater after the bromides and iodides had been replaced by chlorides. To make the definition independent of atomic weights, chlorinity is now defined as 0.3285233 times the weight of silver equivalent to all the halides.

The Mohr-Knudsen titration method served oceanographers for more than 60 years to determine salinity from chlorinity. This modification of the Mohr method uses special volumetric glassware calibrated directly in chlorinity units. The Mohr method uses potassium chromate (K₂CrO₄) as an indicator in the titration of chloride ions chloride (plus a small amount of bromide and iodide) with a silver nitrate (AgNO₃) standard solution.

The other halides present are similarly precipitated.

A problem in the Mohr titration was that silver nitrate is not well suited for a primary standard. The Danish physicist Martin Knudsen (1871-1949) suggested that a standard seawater (Eau de mer Normale or Copenhagen Normal Water) be created and distributed to oceanographic laboratories throughout the world. This water was then used to standardize the silver nitrate solutions. In this way all chlorinity determinations were referred to one and the same standard which gave great internal consistency.

The relationship between chlorinity Cl and salinity S as set forth in Knudsen's tables is

In 1962, however, a better expression for the relationship between total dissolved salts and chlorinity was found to be

siemens    →   simens

Siemens (S) is the SI derived unit of of electrical conductance of a conductor in which a current of one ampere is produced by an electrical potential difference of one volt (S = A·V^-1 = Ω^-1). The unit was named after the German scientist Ernst Werner von Siemens (1816-1892).

degree    →   stupanj

1. Degree is a unit of temperature on a specified scale. The temperatures of boiling and freezing water are: in the Fahrenheit system 212 and 32 degrees; in the Celsius system 100 and 0 (zero) degrees.

2. Degree is a unit of angular measure. A circle is divided into 360 degrees, represented by the symbol °. Degrees are each divided into 60 minutes. Each minute has 60 seconds. Symbols for degree, minute, and second for plane angle is placed after the numerical value and a no space between the numerical value and the unit symbol (α = 2°3'4").

3. In algebra, the degree of a polynomial is the highest power of the variable in the polynomial. For example, 4x³ + 3x² + x + 7 have degree 3.