CHEMISTRY GLOSSARY

impurity    →   nečistoća

Impurities are traces of other elements or compounds in an impure substance.

inhibitor    →   inhibitor

Inhibitor is a chemical that stops (or at least decreases the rate of) a chemical reaction.

insulator    →   izolator

Insulator is a material in which the highest occupied energy band (valence band) is completely filled with electrons, while the next higher band (conduction band) is empty. Solids with an energy gap of 5 eV or more are generally considered as insulators at room temperature. Their conductivity is less than 10^-6 S/m and increases with temperature.

galvanic celll    →   galvanski članak

Galvanic cell (voltaic cell) is a simple device with which chemical energy is converted into electrical energy. Galvanic cells consist of two separate compartments called half cells containing electrolyte solutions and electrodes that can be connected in a circuit. Two dissimilar metals (e.g., copper and zinc) are immersed in an electrolyte. If the metals are connected by an external circuit, one metal is reduced (i.e., gains electrons) while the other metal is oxidized (i.e., loses electrons).

In the example above, copper is reduced and zinc is oxidized. The difference in the oxidation potentials of the two metals provides the electric power of the cell.

A voltaic cell can be diagrammed using some simple symbols. In the diagram the electrodes are on the outer side of the diagram and a vertical line (|) is used to separate the electrode from the electrolyte solution found in the compartment. A double vertical line (||) is used to separate the cell compartments and is symbolic of the salt bridge. Usually in a diagram the species oxidized is written to the left of the double slash. Here is an example of the Daniell cell:

The names refer to the 18th-century Italian scientists Alessandro Volta (1745-1827) and Luigi Galvani (1737-1798).

heat capacity    →   toplinski kapacitet

Heat capacity is defined in general as dQ/dT, where dQ is the amount of heat that must be added to a system to increase its temperature by a small amount dT. The heat capacity at a constant pressure is C_p = (∂H/∂T)_p; that at a constant volume is C_V = (∂E/∂T)_V, where H is enthalpy, E is internal energy, p is pressure, V is volume, and T is temperature. An upper case C normally indicates the molar heat capacity, while a lower case c is used for the specific (per unit mass) heat capacity.

intensive property    →   intenzivno svojstvo

intensive property is a property that does not change when the amount of sample changes. Examples are density, pressure, temperature, colour.

ionic conductor    →   ionski vodič

Ionic conductor is a material that conducts electricity with ions as charge carriers.

isomorphism    →   izomorfija

Isomorphism is the existence of two or more substances that have the same crystal structure, so that they form solid solutions.

lanolin    →   lanolin

Lanolin is a greasy yellow substance obtained from sheep wool. It is used as a dispersing agent in medicine and for cosmetic purposes.

latent heat    →   latentna toplina

Latent heat (L) is the quantity of heat absorbed or released when a substance changes its physical phase at constant temperature (e.g. from solid to liquid at the melting point or from liquid to gas at the boiling point).