CHEMISTRY GLOSSARY

non-metal    →   nemetal

Non-metals are defined as elements that are not metals.

Their physical properties generally include:

• They are poor conductors.
• They are brittle, not ductile in their solid state.
• They show no metallic lustre.
• They may be transparent or translucent.
• They have low density.
• They form molecules which consists of atoms covalently bonded; the noble gases are monoatomic.

Their chemical properties are generally:

• They usually have four to eight valence electrons.
• They have high electron affinities (except the noble gases)
• They are good oxidising agents (except the noble gases)
• They have hydroxides which are acidic (except the noble gases)
• They are electronegative.

nuclear reactor    →   nuklearni reaktor

Nuclear reactor is an assembly of fissionable material (uranium-235 or plutonium-239) designed to produce a sustained and controllable chain reaction for the generation of electric power.

The essential components of a nuclear reactor are:

1. The core, metal rods containing enough fissionable material to maintain a chain reaction at the necessary power level (as much as 50 t of uranium may be required).
2. A source of neutrons to initiate the reaction (such as a mixture of polonium and beryllium)
3. A moderator to reduce the energy of fast neutrons for more efficient fission (material such as graphite, beryllium, heavy water, and light water are used)
4. A coolant to remove the fission-generated heat (water, sodium, helium, and nitrogen may be used)
5. A control system such as rods of boron or cadmium that have high capture cross sections (to absorb neutrons)
6. Adequate shielding, remote-control equipment, and appropriate instrumentation are essential for personnel safety and efficient operation.

Nusselt number    →   Nusseltova značajka

Nusselt number (Nu) is a dimensionless quantity used in fluid mechan-ics, defined by

where h is coefficient of heat transfer, l is length, and k is thermal conductivity.

Peclet number    →   Pecletova značajka

Péclet number (Pe) is a dimensionless quantity used in fluid mechanics, defined by

where v is velocity, l is length, and a is thermal diffussivity.

pipette    →   pipeta

Pipettes are glass tubes which are tapers towards at both ends into narrow opened tubes. According to their design two types of pipettes can be distinguished:

Volumetric pipettes

Volumetric pipettes (transfer or belly pipette) are used in volumetric analysis, when there is a need for taking exact smaller volume of a sample solution or reagent. The upper tube of volumetric pipette has a ringlike marking (mark) which marks its calibrated volume. Pipettes calibrated to deliver (TD or Ex) the indicated volume. By sucking in (with mouth, propipette or a water pump) the liquid is pulled in a little bit above the mark and the opening of the pipet is closed with a forefingertip. Outer wall of pipet is wiped and, with a slight forefinger loosening, the liquid is released until it reaches the mark. Mark must figure as a tangent on a lower edge of the liquid meniscus. A pipette is emptied out by lifting the forefinger off and letting the liquid flow out of the pipette freely. After another 15 s and the tip of the pipette is pulled onto the inner wall of the vessel. It is absolutely forbidden to blow out the contents of the pipette

Graduated pipettes

Graduated pipettes (Mohr pipette) have a scale divided into units of one and of 1/10th of a millilitre. Because of their wide necks it is less accurate than the volumetric pipette. They are used when taking volume of solutions in which accuracy does not have to be very high. They are filled in the same way as volumetric ones and liquid can be gradually released.

plastic    →   plastika

Plastic is a material that can be shaped by the application of heat or pressure. Most are based on synthetic polymers although some are the product of natural substances (such as cellulose derivatives, but excluding the rubbers.). They are usually light and permanent solids, being also heat and electric isolators. If the materials soften again when reheated, they are said to be thermoplastic. If, after fashioning, they resist further applications of heat, they are said to be thermoset.

potential energy    →   potencijalna energija

Potential energy (E_p) is the energy stored in a body or system as a consequence of its position, shape, or state (this includes gravitation energy, electrical energy, nuclear energy, and chemical energy). Gravitational potential energy is the energy associated with the state of separation between bodies that attracts each other via gravitational force. Elastic potential energy is the energy associated with the state of compression or extension of an elastic object. Thermal energy is associated with the random motions of atoms and molecules in a body.

Prandtl number    →   Prandtlova značajka

Prandtl number (Pr) is a dimensionless quantity used in fluid mechanics, defined by

where η is viscosity, ρ is density, and a is thermal diffusivity.

Rayleigh number    →   Rayleighova značajka

Rayleigh number (Ra) is a dimensionless quantity used in fluid mechanics, defined by

where l is length, g is acceleration of gravity, α is cubic expansion coefficient, T is temperature, ρ is density, η is viscosity, and a is thermal diffusivity.

salt bridge    →   solni most

Salt bridge is a permeable material soaked in a salt solution that allows ions to be transferred from one container to another. The salt solution remains unchanged during this transfer.