CHEMISTRY GLOSSARY

torr    →   tor

Torr is obsolete unit of pressure. It is equal to the pressure exerted by a column of mercury one milimetre high, measured at 0 °C. The unit was named after the Italian physicist Evangelista Torricelli (1852-1908).

1 torr = 1 mmHg (0 °C)

760 torr = 1 atm

1 torr = (101 325/760) Pa

Torricelli, Evangelista    →   Torricelli, Evangelista

Evangelista Torricelli (1852-1908) is Italian physicist and mathematician. He became the first scientist to create a sustained vacuum and to discover the principle of a barometer. He filled a tube three feet long, and hermetically closed at one end, with mercury and set it vertically with the open end in a basin of mercury, taking care that no air-bubbles should get into the tube. The column of mercury invariably fell to about twenty-eight inches, leaving an empty space above its level. He discovered that the variation of the height of the mercury from day to day was caused by changes in the atmospheric pressure. He also constructed a number of large objectives and small, short focus, simple microscopes.

U-tube manometer    →   U-manometar

U-tube manometer contains water or mercury in a U-shaped tube, and is usually used to measure gas pressure. One end of the U tube is exposed to the unknown pressure field (P) and the other end is connected to a reference pressure source (usually atmospheric pressure) (P_ref), shown in the schematic below.

If fluid C is the atmosphere, fluid B is the liquid in the U tube (e.g. water or mercury), and fluid A is a gas, then we can assume that ρB >> ρA, ρC. The pressure contributed by the weight of gas within the U tube can therefore be neglected. The gage pressure of the gas can be approximated by,

van der Waals’ equation    →   van der Waalsova jednadžba

Van der Waals’ equation is an equation of state for real fluids which takes the form:

where p is pressure, V_m is molar volume, T is temperature, R is the molar gas constant, and a and b are characteristic parameters of the substance which describe the effect of attractive and repulsive intermolecular forces.

Ziegler process    →   Zieglerov proces

Ziegler process is an industrial process for the manufacture of high-density polyethene using catalysts of titanium(IV) chloride (TiCl₄) and aluminium alkyls (e.g. triethylaluminium, Al(C₂H₅)₃). The process was introduced in 1953 by the German chemist Karl Ziegler (1898-1973). It allowed the manufacture of polythene at lower temperatures (about 60 °C) and pressures (about 1 atm) than used in the original process.