CHEMISTRY GLOSSARY

measuring cylinder    →   menzura

Measuring cylinders (graduated cylinders) are graduated glass cylinders with a capacity from 2 mL to 2 L. They are used when reagent solutions for volume measuring are prepared when accuracy is not of great relevance. The larger the measuring cylinder, the bigger the measuring error.

normal conditions    →   normalni uvjeti

Gas is under normal (or standard) conditions when: p₀ = 10⁵ Pa and T₀ = 273.15 K (0 °C). IUPAC recommends that the former use of the pressure of 1 atm as standard pressure (equivalent to 101 325 Pa) should be discontinued. At these conditions, the molar volume of gas V_m0 is 0.022 711 m³ (22.711 L).

Nusselt number    →   Nusseltova značajka

Nusselt number (Nu) is a dimensionless quantity used in fluid mechan-ics, defined by

where h is coefficient of heat transfer, l is length, and k is thermal conductivity.

osmotic pressure    →   osmotski tlak

Osmotic pressure (Π) is the excess pressure necessary to maintain osmotic equilibrium between a solution and a pure solvent separated by a membrane permeable only to the solvent. In an ideal dilute solution

where c_B is the amount-of-substance concentration of the solute, R is the molar gas constant, and T the temperature.

Ostwald’s dilution law    →   Ostwaldov zakon razrjeđenja

Ostwald’s dilution law is a relation for the concentration dependence of the molar conductivity Λ of an electrolyte solution, viz.

where c is the solute concentration, K_c is the equilibrium constant for dissociation of the solute, and L₀ is the conductivity at cΛ = 0. The law was first put forward by the German chemist Wilhelm Ostwald (1853-1932).

Peclet number    →   Pecletova značajka

Péclet number (Pe) is a dimensionless quantity used in fluid mechanics, defined by

where v is velocity, l is length, and a is thermal diffussivity.

power    →   snaga

Power is the rate at which work is done. If a force does work W in a time interval Δt, the average power is:

Instantanous power is the instantaneous rate of doing work:

Like work, power is scalar quantity. Its SI unit is watt (W); 1 W=1 J s^-1.

practical salinity    →   praktični salinitet

Practical salinity S_P is defined on the Practical Salinity Scale of 1978 (PSS-78) in terms of the conductivity ratio K₁₅ which is the electrical conductivity of the sample at temperature t₆₈ = 15 °C and pressure equal to one standard atmosphere, divided by the conductivity of a standard potassium chloride (KCl) solution at the same temperature and pressure. The mass fraction of KCl in the standard solution is 0.0324356 (32.4356 g of KCl in 1 kg of solution). When K₁₅ = 1, the Practical Salinity P S is by definition 35. The conductivity of that reference solution is C(35,1568,0) = 42.914 mS/cm = 4.2914 S/m (Siemens per meter). Note that Practical Salinity is a unit-less quantity. Though sometimes convenient, it is technically incorrect to quote Practical Salinity in "psu". When K₁₅ is not unity, S_P and K₁₅ are related by the PSS-78 equation

At a temperature of t₆₈ = 15 °C, R_t is simply K₁₅ and Practical Salinity S_P can be determined from the above equation. For temperatures other than t₆₈ = 15 °C, Practical Salinity S_P is given by the following function of R_t (k = 0.0162)

Prandtl number    →   Prandtlova značajka

Prandtl number (Pr) is a dimensionless quantity used in fluid mechanics, defined by

where η is viscosity, ρ is density, and a is thermal diffusivity.

Rayleigh number    →   Rayleighova značajka

Rayleigh number (Ra) is a dimensionless quantity used in fluid mechanics, defined by

where l is length, g is acceleration of gravity, α is cubic expansion coefficient, T is temperature, ρ is density, η is viscosity, and a is thermal diffusivity.