CHEMISTRY GLOSSARY

reaction order    →   red reakcije

Order of a reaction (n) is the sum of the exponents of the concentration terms in a rate equation.

Total order of a reaction is

gallium    →   galij

Gallium was discovered by Lecoq de Boisbaudran (France) in 1875. The origin of the name comes from the Latin word Gallia meaning France. It is soft, blue-white metal. Stable in air and water. Reacts violently with chlorine and bromine. Gallium is found throughout the crust in minerals like bauxite, germanite and coal. Used in semiconductor production. It us used in making LED’s (light-emitting diodes) and GaAs laser diodes.

germanium    →   germanij

Germanium was discovered by Clemens Winkler (Germany) in 1886. The origin of the name comes from the Latin word Germania meaning Germany. It is greyish-white semi-metal. Unaffected by alkalis and most (except nitric) acids. Stable in air and water. Germanium is obtained from refining copper, zinc and lead. Widely used in semiconductors. It is a good semiconductor when combined with tiny amounts of phosphorus, arsenic, gallium and antimony.

glass electrode    →   staklena elektroda

Glass electrode is a hydrogen-ion responsive electrode usually consisting of a bulb, or other suitable form, of special glass attached to a stem of high resistance glass complete with internal reference electrode and internal filling solution system. Glass electrode is also available for the measurement of sodium ions.

The glass electrode, which consists of a thin wall glass bulb, has an extremely high electrical resistance. The membrane of a typical glass electrode (with a thickness of 0.03 mm to 0.1 mm) has an electrical resistance of 30 MΩ to 600 MΩ. The surface of a glass membrane must be hydrated before it will function as a pH electrode. When a glass surface is immersed in an aqueous solution then a thin solvated layer (gel layer) is formed on the glass surface in which the glass structure is softer. This applies to both the outside and inside of the glass membrane.

The simplest explanation for the working of the thin glass electrode is that the glass acts as a weak acid (Glass-H).

The hydrogen ion activity of the internal solution is held constant. When a solution of different pH from the inside comes in contact with the outside of the glass membrane, the glass is either deprotonated or protonated relative to the inside of the glass. The difference in pH between solutions inside and outside the thin glass membrane creates electromotive force in proportion to this difference in pH.

smog    →   smog

Smog is a mixture of smoke and fog. The term is used to describe city fogs in which there is a large proportion of particulate matter (tiny pieces of carbon from exhausts) and also a high concentration of sulphur and nitrogen gases.

soft water    →   meka voda

Soft water is any water that does not contain large concentrations of the dissolved minerals calcium or magnesium.

spectrophotometry    →   spektrofotometrija

Spectrophotometry is a determination of the concentration of a material in a sample by measurement of the amount of light the sample absorbs.

standardisation    →   standardizacija

Standardisation is a process of determining the exact concentration of secondary standard solution.

gravimetry    →   gravimetrija

Gravimetry is the quantitative measurement of an analyte by weighing a pure, solid form of the analyte. Since gravimetric analysis is an absolute measurement, it is the principal method for analysing and preparing primary standards.

A typical experimental procedure to determine an unknown concentration of an analyte in a solution is as follows:

- quantitatively precipitate the analyte from the solution

- collect the precipitate by filtering and wash it to remove impurities

- dry the solid in an oven to remove the solvent

- weigh the solid on an analytical balance

- calculate the analyte concentration in the original solution based on the weight of the precipitate.

half-life of a reactant    →   poluživot reaktanta

For a given reaction the half-life, t_1/2, of a reactant is the time required for its concentration to reach a value that is the arithmetic mean of its initial and final (equilibrium) value.

Half-life is constant for first-order reactions.

Half-life is not constant for second-order reactions but rather it varies with initial concentration and k.