CHEMISTRY GLOSSARY

zero-order reaction    →   reakcija nultog reda

Zero-order reaction is a reaction for which the rate of reaction is independent of the concentration of reactants.

glass electrode    →   staklena elektroda

Glass electrode is a hydrogen-ion responsive electrode usually consisting of a bulb, or other suitable form, of special glass attached to a stem of high resistance glass complete with internal reference electrode and internal filling solution system. Glass electrode is also available for the measurement of sodium ions.

The glass electrode, which consists of a thin wall glass bulb, has an extremely high electrical resistance. The membrane of a typical glass electrode (with a thickness of 0.03 mm to 0.1 mm) has an electrical resistance of 30 MΩ to 600 MΩ. The surface of a glass membrane must be hydrated before it will function as a pH electrode. When a glass surface is immersed in an aqueous solution then a thin solvated layer (gel layer) is formed on the glass surface in which the glass structure is softer. This applies to both the outside and inside of the glass membrane.

The simplest explanation for the working of the thin glass electrode is that the glass acts as a weak acid (Glass-H).

The hydrogen ion activity of the internal solution is held constant. When a solution of different pH from the inside comes in contact with the outside of the glass membrane, the glass is either deprotonated or protonated relative to the inside of the glass. The difference in pH between solutions inside and outside the thin glass membrane creates electromotive force in proportion to this difference in pH.

ideal solution    →   idealna otopina

Ideal solution is a solution in which solvent-solvent and solvent-solute interactions are identical, so that properties such as volume and enthalpy are exactly additive. Ideal solutions follow Raoult’s law, which states that the vapour pressure p_i of component i is p_i = x_i p_i^*, where x_i is the mole fraction of component i and p_i^* the vapour pressure of the pure substance i.

Ilkovic equation    →   Ilkovičeva jednadžba

Ilkovic equation is a relation used in polarography relating the diffusion current (i_d) and the concentration of the depolarizer (c), which is the substance reduced or oxidized at the dropping mercury electrode. The Ilkovic equation has the form

Where k is a constant which includes Faraday constant, π and the density of mercury, and has been evaluated at 708 for max current and 607 for average current, D is the diffusion coefficient of the depolarizer in the medium (cm²/s), n is the number of electrons exchanged in the electrode reaction, m is the mass flow rate of Hg through the capillary (mg/sec), and t is the drop lifetime in seconds, and c is depolarizer concentration in mol/cm³.

The equation is named after the scientist who derived it, the Slovak chemist, Dionýz Ilkovič 1907-1980).

indicator electrode    →   indikatorska elektroda

Indicator electrode is working in one of the electrodes in some classical two-electrode cells, e.g., in a potentiometric electroanalytical setup where the potential of the measuring electrode (against a reference electrode) is a measure of the concentration (more accurately activity) of a species in the solution.

ion selective electrode    →   ion selektivne elektrode

Ion selective electrode (ISE) is an electrode or electrode assembly with a potential that is dependent on the concentration of an ionic species in the test solution and is used for electroanalysis. Ion-selective electrodes are often membrane type electrodes.

ion-product constant    →   ionski produkt vode

The ion-product constant. For the reaction:

the equilibrium expression would be:

Note that all pure liquid terms are omitted, hence H₂O does not appear in the denominator. At 25 °C

ionic strength    →   ionska jakost otopine

Ionic strength (μ or I) is a measure of the total concentration of ions in a solution, defined by

where z_i is the charge of ionic species i and c_i is its concentration.

lead    →   olovo

Lead has been known since ancient times. The origin of the name comes from the Latin word plumbum meaning liquid silver. It is very soft, highly malleable and ductile, blue-white shiny metal. Tarnishes in moist air; stable in oxygen and water. Dissolves in nitric acid. Compounds toxic by inhalation or ingestion. Danger of cumulative effects. Lead is found most often in ores called galena or lead sulfide (PbS). Used in solder, shielding against radiation and in batteries.

lithium    →   litij

Lithium was discovered by Johan August Arfvedson (Sweden) in 1817. The origin of the name comes from the Greek word lithos meaning stone, apparently because it was discovered from a mineral source whereas the other two elements, sodium and potassium, were discovered from plant sources. It is soft silvery-white metal. Lightest of metals. Reacts slowly with water and oxygen. Flammable. Can ignite in air. Reacts with water to give off a flammable gas. Lithium is obtained by passing electric charge through melted lithium chloride and from the silicate mineral called spodumene [LiAl(Si₂O₆)]. Used in batteries. Also for certain kinds of glass and ceramics. Some is used in lubricants.