CHEMISTRY GLOSSARY

thermoelectron    →   termoelektron

Thermoelectron is an electron emitted by a very hot object.

thermoplastic    →   termoplastika

Thermoplastic is ap lastic polymer material that can be repeatedly softened through heating and hardened again by cooling. Examples are PVCor polistiren, which when heated, softens to enable moulding and welding, but on cooling hardens. If the finished product is not correct, the material can be heated and manipulated again.

thermostat    →   termostat

Thermostat is a device which controls the heating or cooling of a substance, by turning the machinery on or off, in order to maintain a constant temperature.

thio    →   tio

Thio- is a prefix that means, replace oxygen with sulphur. For example, a sulphate ion is SO₄^2-; a thiosulphate ion is S2O₃^2-. A cyanate ion is OCN^-; a thiocyanate ion is SCN^-.

Joule-Thomson coefficient    →   Joule-Thompsonov koeficijent

Joule-Thomson coefficient (μ) is a parameter which describes the temperature change when a gas expands adiabatically through a nozzle from a high pressure to a low pressure region. It is defined by

where H is enthalpy.

Joule-Thomson’s effect    →   Joule-Thomsonov efekt

Temperature of ideal gas will not be changed when it is repressed to a lower pressure, but when real gases are repressed to a lower pressure, a lower or higher temperature change appears under high pressures. The temperature change which appears at real gas expansion in a system into which energy is not brought is called Joule-Thomson’s effect. It was determined that when air is repressed by 1 bar, its temperature drops by 0.25 °C. That minute effect is completely irrelevant for most technical processes, but is also used in gas liquefying procedure.

thixotropic fluid    →   tiksotropni fluid

Thixotropic fluid (thixotropy) is a liquid that becomes less viscous when stirred. Paint and printing inks are thixotropic fluids, they are formulated so that they flow more freely when brushed or rolled.

TISAB    →   TISAB

TISAB (Total Ionic Strength Adjustment Buffer) is a buffer solution which maintains a constant activity of an analyte in solution.

titrant    →   titrant

Titrant is the substance that quantitatively reacts with the analyte in a titration. The titrant is usually a standard solution added carefully to the analyte until the reaction is complete. The amount of analyte is calculated from the volume and concentration of titrant required for the complete reaction.

tonne    →   tona

Tonne (t) is an alternative name for megagram (1000 kg).