CHEMISTRY GLOSSARY

Born-Haber cycle    →   Born-Haberov kružni proces

Born-Haber cycle is a cycle of reactions used for calculating the lattice energies of ionic crystalline solids. For a compound MX, the lattice energy is the enthalpy of the reaction

The standard enthalpy of formation of the ionic solid is the enthalpy of the reaction

The cycle involves equating this enthalpy (which can be measured) to the sum of the enthalpies of a number of steps proceeding from the elements to the ionic solid. The steps are:

1) Atomization of the metal

2) Atomization of the nonmetal

3) Ionisation of the metal

This is obtained from the ionisation potential.

4) Ionisation of the nonmetal

This is electron affinity.

5) Formation of the ionic solids

Equation of the enthalpies gives

from which ΔH_L can be found.

conduction    →   kondukcija

This process occurs most significantly in solids. The atoms or molecules in a solid state do not leave their mean positions, but continue to vibrate about their mean positions. They transfer heat energy from one atom to another. This happens because of the coupling between them due to mutually attractive forces.

endothermic reaction    →   endotermna reakcija

Endothermic reactions are the ones in which heat is absorbed and are facilitated by an increase in temperature (ΔH° > 0).

If the reaction is endothermal in one direction, in the opposite direction the reaction is exothermal.

enthalpy growth    →   prirast entalpije

Enthalpy growth (ΔH) is that part of energy of system which can be translated into heat (Q) with a permanent pressure.

explosion    →   eksplozija

Explosion is a rapid violent chemical reaction that produces large amounts of gas and heat, accompanied by light, sound and a high-pressure shock wave.

brass    →   mjed

Brasses are alloys of copper and zinc (generally 5 % to 40 %). Brass has been known to man since prehistoric times, long before zinc itself was discovered. It was produced by melting copper together with calamine, a zinc ore. Its ductility reaches a maximum with about 30 % zinc and its tensile strength with 45 % although this property varies greatly with the mechanical and heat treatment of the alloy. Typical applications included gears, plumbing ware fittings, adapters, valves and screw machine products. The French horn is a valved brass wind instrument.

Brass may contain small amounts of other alloying elements, such as aluminum, lead, tin, or nickel. Lead can be added as an alloying element resulting in a brass that can be rapidly machined and produces minimal tool wear. Additions of aluminium, iron and manganese to brass improve strength, whilst silicon additions improve wear resistance. Brass containing tin (< 2 % ) is less liable to corrosion in seawater; it is sometimes called naval brass and is used in naval construction.

Bunsen burner    →   Bunsenov plamenik

Bunsen burner is a standard source of heat in the laboratory. German chemist Roberts Bunsen (1811-1899) improved the burner's design, which had been invented by Faraday, to aid his endeavors in spectroscopy. The Bunsen burner has a vertical metal tube through which a fine jet of fuel gas is directed. Air is drawn in through airholes near the base of the tube and the mixture is ignited and burns at the tube’s upper opening. The flow of this air is controlled by an adjustable collar on the side of the metal tube. When the whole is closed a yellow safety flame is displayed. Where as when the whole is open it displays a power dull blue flame with a faint blue outer flame with a vibrant blue core used u for combustion and hearting. The flame can reach temperatures of 1 500 °C.

calorimeter    →   kalorimetar

Calorimeter is an instrument used to measure the energy absorbed or released in a chemical reaction. It also used in determining specific heat.

flame    →   plamen

Flame is a mixture of heat and light energy which occurs when sudden combustion occurs.

fouling    →   obrastanje

1. Fouling is the deposition of insoluble materials, such as bacteria, colloids, oxides and water-borne debris, onto the surface of a reverse osmosis or ultrafiltration membrane. Fouling is associated with decreased flux rates and may also reduce the rejection rates of reverse osmosis membranes. Fouling also refers to the accumulation of normally inorganic deposits on heat exchanger tubing.

2. Fouling is an accumulation of marine organism deposits on a submerged metal surface.