CHEMISTRY GLOSSARY

diffusion current    →   difuzijska struja

Diffusion current (i_d) is a current which is limited by the speed of particle diffusion in an electrolyte solution.

disproportionation    →   disproporcioniranje

Disproportionation is a reaction in which the same molecule reduces and oxidates itself at the same time.

aqua regia    →   zlatotopka

Aqua regia is a mixture of one volume part of nitric acid (HNO₃) and three volume parts of hydrochloric acid (HCl). Dissolving of gold in aqua regia is described by the following equation:

autocatalysis    →   autokataliza

Autocatalysis is a reaction in which its product can act as a catalyst. Oxalate oxidation with permanganate in an acid solution is a slow reaction

Mn²⁺-ions catalyse this reaction. When enough Mn²⁺-ions are created, the reaction occurs instantly.

battery    →   baterija

Battery a device that converts chemical energy to electrical energy. The process underlying the operation of a battery involves a chemical reaction in which electrons are transferred from one chemical species to another. This process is carried out in two half-reactions, one that involves the loss of electrons and one that involves their gain. The battery is an electrochemical cell divided in two half-cells, and reaction proceeds when these are connected together by an electrically conducting pathway. The passage of electrons from one half-cell to the other corresponds to an electric current. Each half-cell contains an electrode in contact with the reacting species. The electrode which passes electrons into the circuit when battery discharges is called anode and is negative terminal. The electrode which receives electrons is called cathode, and is the battery’s positive terminal. The electrical circuit is completed by an electrolyte, an electrically conducting substance placed between the two electrodes which carriers a flow of charge between them. In wet cells, the electrolyte is a liquid containing dissolved ions, whose motion generates an electrical current; in dry cells the electrolyte is basely solid, for example, a solid with mobile ions or porous solid saturated with an ionic solution.

dynamic equilibrium    →   dinamička ravnoteža

Dynamic equilibrium is established when two opposing processes are occurring at precisely the same rate, so that there is no apparent change in the system over long periods of time.

effervescence    →   pjenušanje

Effervescence is the formation of gas bubbles in a liquid by a chemical reaction. An example of effervescence is the release of carbon dioxide which bubbles as a gas from the liquid when limestone chips, which are composed of calcium carbonate, are added to dilute hydrochloric acid.

effusion    →   efuzija

Effusion is the flow of a gas through a small aperture. The relative rates at which gases effuse, under the same conditions, is approximately inversely proportional to the square of their densities.

blast furnace    →   visoka peć

Blast furnace is a furnace for smelting of iron from iron oxide ores (hematite, Fe₂O₃ or magnetite, Fe₃O₄). Coke, limestone and iron ore are poured in the top, which would normally burn only on the surface. The hot air blast to the furnace burns the coke and maintains the very high temperatures that are needed to reduce the ore to iron. The reaction between air and the fuel generates carbon monoxide. This gas reduces the iron(III) oxide in the ore to iron.

Because the furnace temperature is in the region of 1500 °C, the metal is produced in a molten state and this runs down to the base of the furnace.

The production of iron in a blast furnace is a continuous process. The furnace is heated constantly and is re-charged with raw materials from the top while it is being tapped from the bottom. Iron making in the furnace usually continues for about ten years before the furnace linings have to be renewed.

Born-Haber cycle    →   Born-Haberov kružni proces

Born-Haber cycle is a cycle of reactions used for calculating the lattice energies of ionic crystalline solids. For a compound MX, the lattice energy is the enthalpy of the reaction

The standard enthalpy of formation of the ionic solid is the enthalpy of the reaction

The cycle involves equating this enthalpy (which can be measured) to the sum of the enthalpies of a number of steps proceeding from the elements to the ionic solid. The steps are:

1) Atomization of the metal

2) Atomization of the nonmetal

3) Ionisation of the metal

This is obtained from the ionisation potential.

4) Ionisation of the nonmetal

This is electron affinity.

5) Formation of the ionic solids

Equation of the enthalpies gives

from which ΔH_L can be found.