CHEMISTRY GLOSSARY

Nernst’s electrode potential equation    →   Nernstova jednadžba za elektrodni potencijal

For general reaction of some redox system

dependence of electrode potential of redox system upon activity of oxidised and reduced form in solution is described in Nernst’s equation for electrode potential:

where E = to electrode potential of redox system

E° = standard electrode potential of redox system

R = universal gas constant

T = thermodymical temperature

F = Faraday’s constant

z = number of electrons exchanged in redox reaction

a_O = activity of oxidised form

a_R = activity of reduced form

n = stechiometrical coefficient of oxidised form

m = stechiometrical coefficient of reduced form

referent electrode    →   referentna elektroda

Referent electrode is an electrode whose potential is known and completely independent of analyte concentration. Mostly used referent electrodes are calomel and silver/silver chloride electrode.

Table: Dependence of referent electrodes potentials on KCl concentration

sacrificial protection    →   zaštita žrtvovanom elektrodom

Sacrificial protection is the protection of iron or steel against corrosion by using a more reactive metal. Pieces of zinc or magnesium alloy are attached to pump bodies and pipes. The protected metal becomes the cathode and does not corrode. The anode corrodes, thereby providing the desired sacrificial protection. These items are known as sacrificial anodes and "attract" the corrosion to them rather than the iron/steel. The sacrificial anodes must be replaced periodically as they corrode.

The iron pipe will be connected to a more reactive metal such as magnesium through cooper wires, the magnesium will donate its electrons to the iron preventing it from rusting. Iron which is oxidises will immediately be reduced back to iron.

silver/silver-chloride electrode    →   srebro/srebrov klorid elektroda

Silver/silver-chloride electrode is by far the most common reference type used today because it is simple, inexpensive, very stable and non-toxic. It is mainly used with saturated potassium chloride electrolyte, but can be used with lower concentrations such as 3.5 mol dm^-3 or 1 mol dm^-3 potassium chloride. Silver/silver-chloride electrode is a referent electrode based on the following halfreaction

standard electrode potential    →   standardni elektrodni potencijal

Standard electrode potential (E°) (standard reduction potentials) are defined by measuring the potential relative to a standard hydrogen electrode using 1 mol solution at 25 °C. The convention is to designate the cell so that the oxidised form is written first. For example,

The e.m.f. of this cell is -0.76 V and the standard electrode potential of the Zn²+|Zn half cell is -0.76 V.

standard hydrogen electrode    →   standardna vodikova elektroda

Standard hydrogen electrode is a system in which hydrogen ion and gaseous hydrogen are present in their standard states. The convention is to designate the cell so that the standard hydrogen electrode is written first.

The electrode is used as a reference (of zero) for the values of other standard electrode potentials.

CO2 ion selective electrode    →   CO2 ion selektivna elektroda

The carbon dioxide ion selective electrode uses a gas-permeable membrane to separate the sample solution from the electrode internal solution. Dissolved carbon dioxide in the sample solution diffuses through the membrane until an equilibrium is reached between the partial pressure of CO₂ in the sample solution and the CO₂ in the internal filling solution. In any given sample the partial pressure of carbon dioxide will be proportional to the concentration of carbon dioxide. The diffusion across the membrane affects the level of hydrogen ions in the internal filling solution:

The hydrogen level of the internal filling solution is measured by the pH electrode located behind the membrane. The internal filling solution contains a high concentration of sodium bicarbonate (e.g. 0.1 mol/L NaHCO₃) so that the bicarbonate level can be considered constant.

Gauss’ law for electrostatics    →   Gaussov zakon za elektrostatiku

Gauss’ law describes the relation between charge and electric field in static situations, so it is equivalent to Coulomb’s law, which can be derived from Gauss’ law. Gauss’ law states that the net flux of electric field, Φ, through an imaginary closed surface, S, - a Gaussian surface - is equal to the net charge, q, inside that closed surface:

where electric flux Φ through Gaussian surface is given by:

ε₀ is the permittivity constant and dS is a surface element.

absorption coefficient    →   apsorpcijski koeficijent

Absorption coefficient (a) is the relative decrease in the intensity of a collimated beam of electromagnetic radiation, as a result of absorption by a medium, during traversal of an infinitesimal layer of the medium, divided by the length traversed.

acceptor    →   akceptor

Acceptor is a compound, molecule or ion, to which electrons are donated in the formation of a coordinate bond