CHEMISTRY GLOSSARY

nitride    →   nitrid

Nitrides are compounds of nitrogen with metal in which nitrogen has an oxidation number -3, are hard and resistant to high temperatures.

normal boiling point    →   normalno vrelište

Normal boiling point is a temperature at which pressure of liquid vapour is 101 325 Pa.

partial pressure    →   parcijalni tlak

Partial pressure is a pressure that one component of gas mixture would have if it were alone in the same volume and at the same temperature as the mixture is in now.

dielectric constant    →   dielektrična konstanta

Dielectric constant or permittivity (ε) is an index of the ability of a substance to attenuate the transmission of an electrostatic force from one charged body to another. The lower the value, the greater the attenuation. The standard measurement apparatus utilises a vacuum whose dielectric constant is 1. In reference to this, various materials interposed between the charged terminal have the following value at 20 °C:

The exceptionally high value for water accounts for its unique behaviour as a solvent and in electrolytic solutions. Dielectric constant values decrease as the temperature rises.

differential thermal analysis    →   diferencijalna termalna analiza

Differential thermal analysis (DTA) is a technique that is often used to analyze materials that react or decompose at higher temperatures. The difference in temperature between the sample and an inert reference material is monitored as both are heated in a furnace. Phase transitions and chemical reactions taking place in the sample on heating cause the temperature difference to become larger, at temperatures that are characteristic of the sample.

diffusion    →   difuzija

Diffusion is the spontaneous mixing of one substance with another when in contact or separated by a permeable membrane. Diffusion is a result of the random motions of their component atoms, molecules, ions, or other particles. Diffusion occurs most readily in gases, less so in liquids, and least in solids. The rate of diffusion is proportional to the concentration of the substance and increases with temperature. The theoretical principles are stated in Fick’s laws.

dissociation    →   disocijacija

Dissociation is the process by which a chemical combination breaks up into simpler constituents as a result of either added energy (dissociated by heat), or the effect of a solvent on a dissolved polar compound (electrolytic dissociation). It may occur in the gaseous, solid, or liquid state, or in a solution.

An example of dissociation is the reversible reaction of hydrogen iodide at high temperatures

The term dissociation is also applied to ionisation reactions of acids and bases in water. For example

which is often regarded as a straightforward dissociation into ions

permanent hardness    →   stalna tvrdoća

Permanent hardness in water is hardness due to the presence of the chlorides, nitrates and sulphates of calcium and magnesium, which will not be precipitated by boiling. The lime scale can build up on the inside of the pipe restricting the flow of water or causing a blockage. This can happen in industry where hot water is used.

polymorphic transition    →   polimorfni prijelaz

Polymorphic transition is a reversible transition of a solid crystalline phase at a certain temperature and pressure to another phase of the same chemical composition with a different crystal structure. For examples, the transitions of quartz (SiO₂) at 1 143 K to tridymite, and at 1 743 K to cristobalite.

electrode potential    →   elektrodni potencijal

Electrode potential is defined as the potential of a cell consisting of the electrode in question acting as a cathode and the standard hydrogen electrode acting as an anode. Reduction always takes place at the cathode, and oxidation at the anode. According to the IUPAC convention, the term electrode potential is reserved exclusively to describe half-reactions written as reductions. The sign of the half-cell in question determines the sign of an electrode potential when it is coupled to a standard hydrogen electrode.

Electrode potential is defined by measuring the potential relative to a standard hydrogen half cell

The convention is to designate the cell so that the oxidised form is written first. For example

The e.m.f. of this cell is

By convention, at p(H₂) = 101325 Pa and a(H⁺) = 1.00, the potential of the standard hydrogen electrode is 0.000 V at all temperatures. As a consequence of this definition, any potential developed in a galvanic cell consisting of a standard hydrogen electrode and some other electrode is attributed entirely to the other electrode