CHEMISTRY GLOSSARY

Peltier effect    →   Peltierov efekt

Peltier effect is the absorption or generation of heat (depending on the current direction) which occurs when an electric current is passed through a junction between two materials.

petroleum ether    →   petroleter

Petroleum ether is the petroleum fraction consisting of C₅ and C₆ hydrocarbons and boiling in the range 35 °C to 60 °C; commonly used as a laboratory solvent.

polyvalent element    →   polivalentni elementi

Polyvalent element is a molecule which having more than one valence, for example oxygen is a divalent in H₂O, nitrogen is a trivalent in NH₃, carbon is a tetravalent in methane (CH₄).

Ilkovic equation    →   Ilkovičeva jednadžba

Ilkovic equation is a relation used in polarography relating the diffusion current (i_d) and the concentration of the depolarizer (c), which is the substance reduced or oxidized at the dropping mercury electrode. The Ilkovic equation has the form

Where k is a constant which includes Faraday constant, π and the density of mercury, and has been evaluated at 708 for max current and 607 for average current, D is the diffusion coefficient of the depolarizer in the medium (cm²/s), n is the number of electrons exchanged in the electrode reaction, m is the mass flow rate of Hg through the capillary (mg/sec), and t is the drop lifetime in seconds, and c is depolarizer concentration in mol/cm³.

The equation is named after the scientist who derived it, the Slovak chemist, Dionýz Ilkovič 1907-1980).

indicator electrode    →   indikatorska elektroda

Indicator electrode is working in one of the electrodes in some classical two-electrode cells, e.g., in a potentiometric electroanalytical setup where the potential of the measuring electrode (against a reference electrode) is a measure of the concentration (more accurately activity) of a species in the solution.

inert electrode    →   inertna elektroda

Inert electrode is an electrode that serves only as a source or sink for electrons without playing a chemical role in the electrode reaction. Precious metals, mercury, and carbon are typically used as inert electrodes. The inert nature of the electrode can sometimes be questioned. While the electrode may not take part in the reaction as a reactant or product, it still can act as an electrocatalyst.

ion exchanger    →   ionski izmjenjivač

Ion-exchanger is a solid or liquid material containing ions that are exchangeable with other ions with a like charge that are present in a solution in which the material is insoluble. Ion-exchange resins consist of various copolymers having a cross-linked three-dimensional structure to which ionic groups have been attached.

ion selective electrode    →   ion selektivne elektrode

Ion selective electrode (ISE) is an electrode or electrode assembly with a potential that is dependent on the concentration of an ionic species in the test solution and is used for electroanalysis. Ion-selective electrodes are often membrane type electrodes.

Joule-Thomson’s effect    →   Joule-Thomsonov efekt

Temperature of ideal gas will not be changed when it is repressed to a lower pressure, but when real gases are repressed to a lower pressure, a lower or higher temperature change appears under high pressures. The temperature change which appears at real gas expansion in a system into which energy is not brought is called Joule-Thomson’s effect. It was determined that when air is repressed by 1 bar, its temperature drops by 0.25 °C. That minute effect is completely irrelevant for most technical processes, but is also used in gas liquefying procedure.

kinetic energy    →   kinetička energija

Kinetic energy (E_k) is associated with the state of motion of a body. It is a scalar property and defined to be

Kinetic energy is most clearly exhibited in gases, in which molecules have much greater freedom of motion than in liquids and solids.